Awesomatix EP Touring Car (A700 Shaft Drive)
#3738
Suspended
iTrader: (1)
hey guys need some suggestions on the diff..built car..went together great..my problem is with the diff..when I tighten its very notchy and super tight..i built per instructions..made sure deburrred..even ran a whole battery pack switching between holdin rear wheels..thinking it mught break in..i have built many gear diffs..but I have had it apart 4 times now..its still super tight and notchy..any help would be greatly appreciated..im wanting to get this on the track
#3739
R/C Tech Elite Member
iTrader: (28)
hey guys need some suggestions on the diff..built car..went together great..my problem is with the diff..when I tighten its very notchy and super tight..i built per instructions..made sure deburrred..even ran a whole battery pack switching between holdin rear wheels..thinking it mught break in..i have built many gear diffs..but I have had it apart 4 times now..its still super tight and notchy..any help would be greatly appreciated..im wanting to get this on the track
If you buy the g05st/g06st combo you just slap the diff together and run it.
#3740
Tech Fanatic
hey guys need some suggestions on the diff..built car..went together great..my problem is with the diff..when I tighten its very notchy and super tight..i built per instructions..made sure deburrred..even ran a whole battery pack switching between holdin rear wheels..thinking it mught break in..i have built many gear diffs..but I have had it apart 4 times now..its still super tight and notchy..any help would be greatly appreciated..im wanting to get this on the track
All inner gears should be aligned properly to avoid the teeth jamming.
#3745
Tech Fanatic
Do you mean OR05 maybe?
Could you please to measure the outer and the inner diameters of your OR05.
It should be JIS P4 o-ring sizes: 3,8/7,6mm.
#3748
Tech Master
iTrader: (2)
Curious to know what application would that be?
I had the chance to test my newly built EXL kit with some modifications I made.
It was a good first test.
A bit more info and video in my blog
JD RACING BLOG
I had the chance to test my newly built EXL kit with some modifications I made.
It was a good first test.
A bit more info and video in my blog
JD RACING BLOG