Tc4 speed run 137mph
#92
http://youtu.be/XlyOYMAfnNs
Finally broke i to the 130's with my TC4. Check out thiis short vid
http://youtu.be/vPCZcLKwR1k
Heres a slow mo vid.
Finally broke i to the 130's with my TC4. Check out thiis short vid
http://youtu.be/vPCZcLKwR1k
Heres a slow mo vid.
#93
Tech Addict
Im sure your tc5 will be just as fast if not faster. Im still waiting on my Neu motor. Its been 6 wks since I ordered it. They said they are still waiting on a stator. Maybe I should have went with Cordova. Probably would have been here by now.
#95
Tech Addict
#97
Tech Addict
Im currently running the Leopard 3665 2680kv on 2 Nano Tech A Spec gen 1 4500 mah 3s (6s). Geared 49/45. The motor gets only a little warm after each pass. I want to gear up more but these gears are litterally the smallest spur and biggest pinion Robinson racing makes. Still trying to figure out how to gear higher.
Last edited by tc4basher; 07-28-2015 at 05:27 PM.
#98
Tech Master
iTrader: (8)
http://www.rctech.net/forum/monster-...tp-4070-a.html
#99
Im currently running the Leopard 3665 2680kv on 2 Nano Tech A Spec gen 1 4500 mah 3s (6s). Geared 49/45. The motor gets only a little warm after each pass. I want to gear up more but these gears are litterally the smallest spur and biggest pinion Robinson racing makes. Still trying to figure out how to gear higher.
#101
Tech Addict
Thanks for the tips fellas! Looks like RW has a 45t spur that would get my FDR down to 2.5 with the 45t pinion on there right now.
#102
TC4 speed run 137 moh
Bringing back an old post, Have any of you guys made recent speed runs? I have been running a TC4 with mamba max pro/5700kv. With 3s have gone 100mph on 55/43 (3.19) FDR. 4s managed 107 mph not fully opened up. What bodies has anyone had good luck with? Thanks
#103
I know i have made runs, and tc4 basher has also . they are on our youtube pages. check out the speed thread in here has some good videos. I ran 99mph on 2s. few weeks ago.. but bodies i like mccalister bodies, i have 2 different bodies. tc4 basher will chime in im sure on what he runs. also to go fast i reinforce my bodies with fiberglass as the will deform at high speed..
#104
Tech Addict
https://youtu.be/f84CGrUa28A
https://youtu.be/u9G9nMQX-Hk
Here are a couple of my most recent tc4 speed run videos. My hardened steel rear diff broke on me at 124 mph this past Sunday. I lost brakes and coasted into a curb. It needs some repairs.
The body I run is a HPI FI McLaren that has also been reinforced.
Your speeds with the 5700kv mmp sound about rite. I had the same setup in my TC4 before and ran very similar speeds. Keep at it!
https://youtu.be/u9G9nMQX-Hk
Here are a couple of my most recent tc4 speed run videos. My hardened steel rear diff broke on me at 124 mph this past Sunday. I lost brakes and coasted into a curb. It needs some repairs.
The body I run is a HPI FI McLaren that has also been reinforced.
Your speeds with the 5700kv mmp sound about rite. I had the same setup in my TC4 before and ran very similar speeds. Keep at it!
#105
Speed run TC4
I checked out the you tube videos, Nice runs. So Philldoggg, and Tc4basher you are both in the 130s? What are the current limitations for you guys now? Out of Battery, motor power, gearing topped out, or just staying on the ground?