Team Magic G4
#3196
Looking good Kodak.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
#3197
Originally Posted by razzor
Looking good Kodak.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
#3198
1 - 2 mm is fine .Got this tip from the build review in the topics section on 3hobby.
#3200
Tech Elite
iTrader: (2)
Originally Posted by Gascar 24
hey patto
did last test before first meet this sunday
had a mugen guy say hey thats going well isnt it
was quick but just need more track time
to stay on the track
paul
did last test before first meet this sunday
had a mugen guy say hey thats going well isnt it
was quick but just need more track time
to stay on the track
paul
Looks good with your own car on it with the logo, nice touch
#3202
Tech Elite
iTrader: (10)
Funny you mention Edith, there sending me a FREE T-Shirt for my efforts on the AVATARS.....!
I feel the love.....
Its good to see so many cars, thou we should post a TM Gallery, possibly in my blog area or a new topic here on rctech, keep in mind it would be just pics
A. you send me your fav pic of car with body & with out body shot
B. we post here and i can collect as i see.
Let me know what you all think
I feel the love.....
Its good to see so many cars, thou we should post a TM Gallery, possibly in my blog area or a new topic here on rctech, keep in mind it would be just pics
A. you send me your fav pic of car with body & with out body shot
B. we post here and i can collect as i see.
Let me know what you all think
#3203
Tech Elite
iTrader: (19)
Originally Posted by Gascar 24
hey patto
did last test before first meet this sunday
had a mugen guy say hey thats going well isnt it
was quick but just need more track time
to stay on the track
hope we can put some championship points on the board for the G4S next weekend
paul
did last test before first meet this sunday
had a mugen guy say hey thats going well isnt it
was quick but just need more track time
to stay on the track
hope we can put some championship points on the board for the G4S next weekend
paul
#3204
Tech Elite
iTrader: (10)
Originally Posted by razzor
Looking good Kodak.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
Have you shortened teh 2 speed clutch screws.If you havent Id suggest taking them out and shortening about 2mm.If you dont ,when adjusting the 2nd gear change point they sometimes go right through the shoes and touch the ally housing.
so basicall y the factory screws are still too long i guess....
In the instructions i measured the screws they are 15mm long...
so cut it down to 13mm?
regards
Frankie
#3205
ummm kodak how did u measure em cos i measured em usin verniers and i got 14.4mm which leads to the next question which 1 is right how did u measure urs
#3206
Tech Elite
iTrader: (10)
Originally Posted by MaDaGAS CAR
ummm kodak how did u measure em cos i measured em usin verniers and i got 14.4mm which leads to the next question which 1 is right how did u measure urs
good set of verniers.... yeah 15mm was what i got, i will test it for now and see how it goes, there is a bit of variety in this part of the build, umm not sure why.
cheers
#3208
Originally Posted by Kodak Hodak
no i haven't....
so basicall y the factory screws are still too long i guess....
In the instructions i measured the screws they are 15mm long...
so cut it down to 13mm?
regards
Frankie
so basicall y the factory screws are still too long i guess....
In the instructions i measured the screws they are 15mm long...
so cut it down to 13mm?
regards
Frankie
http://teammagic.com.tw/Download/G4S...ded%20View.pdf
In the pic they show mounting the reciever to the lower piece ,I mount it to the cover above.This way if using a crystal based reciever you just remove the 2 screws and the lower piece can be removed and you have access from underneath the chassis.No stretching of wires etc.
I always had a hassle with this untill I saw how the RTR reciever was mounted.
Hope you guys understand.
#3209
Originally Posted by Kodak Hodak
The MUGEN Aussie one is a once off, i can only say this as i have really only designed these for TMG4S Fans as we are seriuose in our cars and sport.
Just trying to keep the TM guys as a community together.....
Please dont take it personally its just if i start to do for every make, i wont get nothing done.
Spoken to Team Magic "Edith" they are over the moon in the design i have created and they have been kindly enough to send me a FREE TM T-Shirt for my efforts.
Or you could donate to the Kodak Racing funds if you require a custom Avatar, Lets say $1 AUD for an avatar.....
I just hope we all understand where i am coming from.
Regards
Frankie
Just trying to keep the TM guys as a community together.....
Please dont take it personally its just if i start to do for every make, i wont get nothing done.
Spoken to Team Magic "Edith" they are over the moon in the design i have created and they have been kindly enough to send me a FREE TM T-Shirt for my efforts.
Or you could donate to the Kodak Racing funds if you require a custom Avatar, Lets say $1 AUD for an avatar.....
I just hope we all understand where i am coming from.
Regards
Frankie
Congratulations to your T-shirt.I find it well that TM make this. I have my G4 homepage now already one year and the forum a half year.
however thank said still nobody.
in addition, nobody needs
I makes that gladly
OHHHHH is my English bad i must come to Australia(I Love it) to learn better english!!!!!!
unfortunately mine does not have my big boss (Aldi ) a job there for me.
Good luck with the G4S the realy best RC car in the Moment.
When you have Time change the original bearing with ceramic bearing.
The G4 run better with them!!!!!
Thanks
Marc
Last edited by g4-racing.de; 01-07-2007 at 12:19 PM.
#3210
Tech Elite
iTrader: (10)
Originally Posted by razzor
Thats correct ,one more thing dont mount your reciever on the bottom reciever tray but upside down on the upper cover.
http://teammagic.com.tw/Download/G4S...ded%20View.pdf
In the pic they show mounting the reciever to the lower piece ,I mount it to the cover above.This way if using a crystal based reciever you just remove the 2 screws and the lower piece can be removed and you have access from underneath the chassis.No stretching of wires etc.
I always had a hassle with this untill I saw how the RTR reciever was mounted.
Hope you guys understand.
http://teammagic.com.tw/Download/G4S...ded%20View.pdf
In the pic they show mounting the reciever to the lower piece ,I mount it to the cover above.This way if using a crystal based reciever you just remove the 2 screws and the lower piece can be removed and you have access from underneath the chassis.No stretching of wires etc.
I always had a hassle with this untill I saw how the RTR reciever was mounted.
Hope you guys understand.
Ahhh thanks for the tip, i shall be using a Spektrum reciever so its cystal free, will it matter if its the way shown in my blogg?
Or should i swap the mounting around for future?