viperviper

Looking for one pipe that best match this engine. Pls advise. tks,

jameslow

iTrader: (1)

bro... sorry for using ur thread also... cause i also just got myself a ns12ts1 ZAC and was thinking which pipe will suit. i will be using skyline....

viperviper

Can u share where u get it from? is nova 2630 a good match?

Riketsu

iTrader: (34)

It will all depend on the track your going to be running on.

Here are the pipes that will work for your engine (in the order I'd recommend em):

-MAX 2602
-Novarossi 2630
-Skyline VR12 Plus

Other similar pipes that I believe will also work are: ATS 2621, JP 2620, Novarossi 2601, RB 2604.

viperviper

thanks for the recommendation.

I'm eyeing on the Nova 2630. But what is the different between

1. Novarossi 2630 With Conical 6 Fins Manifold For .12
and
2. Novarossi 2630 With Conical 5 Fins Manifold For .12

Pls advise. tks./

Speyederjedi

iTrader: (1)

I would go with the Novarossi 2630 tuned pipe as it was designed for Novarossi engines. The different conical fin headers are for low end and high end performance. Someone may correct me on this but I believe there are 3, 4, 5, 6 and 7 fin conical headers available for the Novarossi 2630 tuned pipe. This aollows for a wide range of tuning based on whether you are running on a short, medium or long track and if your looking for more low end power or top end speed.

Regards,
Speyederjedi

jameslow

iTrader: (1)

6 fins = longer header = better bottom end power

5 fins = shorter header = better top end power

Riketsu

iTrader: (34)

I believe that for the 2630, theres only 3 different types of fins, short, medium and long. I can't recall how many fins is for what

novarossi OZ

iTrader: (3)

Guy's
correct


5- relate's to short --more top end
6- medium --- good all over
7-long manifolds ---better bottom end

regards Aaron

viperviper

hey, thanks all. Just ordered a 6 fins pipe. Will let u guys know if it's good. cheers!

duku

is the kawahara pipe suitable for dis engine..

aturbotony

The JPblack 2620 will wake up any Novarossi based engine

viperviper

How abt novarossi 12 size outlaw pipe, can it be used on this engine?

And how does it compare to the Novarossi 2630 pipe?

Pls advise.

viperviper

Anyone can advise? thanks!

Riketsu

iTrader: (34)

My suggestion is stay away from Outlaw pipes because this engine was designed in the beginning for Sedan pipes. In my own opinion, even if it was allowed I would not match up a .12 engine with an Outlaw pipe. Hope this answers your question.