Team Br00d Racing Motors
#2791
Tech Master
iTrader: (1)
At the first (UK) BRCA stock national this weekend i took 2nd in the B main overall winning the first leg of the finals using team br00d IB3800's and a br00d monster stock, bought off the shelf showing just how good they are! I ran an A final time easily, just traffic in qualifying stopped me making the show!
#2794
Any idea when any mod 4200's will be available? Start of the season is getting close here!!
#2796
Tech Master
iTrader: (4)
Caliberx - Minimum comm size should be .270 for both of those motors, you can get them to .265 an they are fast but you run the chance of the comm coming apart. As far as roll out, I don't have any experience with 4 cell, but with a monster compared to a p2k with 6 cells we generally have to go down 2-3 teeth with a monster, try 2 and go from there.
#2797
I have had com's as small as 6.6mm 0.260" I find 6.8mm (0.2677")
to be safe
to be safe
#2798
Regional Moderator
Originally Posted by pookat
Any idea when any mod 4200's will be available? Start of the season is getting close here!!
#2800
No I meant through Br00d website.
Thanks for the info, will place an order today or tomorrow.
Thanks for the quick reply.
edit: The mod ones are showing out of stock still, I take it you are about to update this?
Thanks for the info, will place an order today or tomorrow.
Thanks for the quick reply.
edit: The mod ones are showing out of stock still, I take it you are about to update this?
Last edited by pookat; 04-06-2006 at 09:15 AM. Reason: because I'm stupid
#2802
O.K. Thanks, I've placed my order.
#2803
CAn you give me an example of what kind of numbers your stock motors have?
I was checking out your website; very nice site BTW; and have heard some good things about your products. Can you select a stock blueprinted motor and give me your dyno results so I can get a feel for it. I run Xray for asphalt touring.
Chris
Chris
#2804
Regional Moderator
Originally Posted by chris moore
I was checking out your website; very nice site BTW; and have heard some good things about your products. Can you select a stock blueprinted motor and give me your dyno results so I can get a feel for it. I run Xray for asphalt touring.
Chris
Chris
If you want proof that Br00d motors are fast, check the nationals results for the past year.
So much about how a motor performs is on the user end, Dyno results are only good for ballpark gearing.
The best option is to select a motor and give it a try yourself.
The cost is minimal compared to what we spend on this sport.
Thank you for your inquiry, hope to satisfy your need for Br00d Power.