pro3
#347
isnt 8 degrees a lot of rear castor? wouldnt that slow you down a lot? does anybody have or know where i nac get a good setup for the track in perris CA? i know you raced there mike, so what setup did you use?
lmk thanks
Kurt
lmk thanks
Kurt
#348
Tech Champion
iTrader: (15)
W'sup- K
Think they were reffering to front 8d caster.
This is what I ran for that temprature
Base set-up for my car....
Sorex 36r echo red insert (100f track temp)
1.5camber all corners
8 front caster
45wt oil #2 pistons all corners
serpent orange front spring/ back spring ? (pulled from my parts box- slightly softer than front) Had a med (not soft not hard) feel that felt equal front to back (sorry if vague)
4.5mm ride hieght
no one-way
no top plate
High roll center in back
High roll center in front
Lower holes for outside pins
1-2-9 block in rear- 0 rear toe hubs
The track was a little dusty in the first few rounds but came alive in the main.
I usually run this same set-up at all tracks and just change tires for the weather or change the rear shock angle or add oneways- works really well for me.
Think they were reffering to front 8d caster.
This is what I ran for that temprature
Base set-up for my car....
Sorex 36r echo red insert (100f track temp)
1.5camber all corners
8 front caster
45wt oil #2 pistons all corners
serpent orange front spring/ back spring ? (pulled from my parts box- slightly softer than front) Had a med (not soft not hard) feel that felt equal front to back (sorry if vague)
4.5mm ride hieght
no one-way
no top plate
High roll center in back
High roll center in front
Lower holes for outside pins
1-2-9 block in rear- 0 rear toe hubs
The track was a little dusty in the first few rounds but came alive in the main.
I usually run this same set-up at all tracks and just change tires for the weather or change the rear shock angle or add oneways- works really well for me.
#349
Graphite parts....finally!
#350
i know this is kinda a dumb question...but what is castor? i thought it was the same as toe in in the rear. lmk
#351
Tech Champion
iTrader: (15)
Kurt- Go here http://www.team-orion.ch/rccarhandling/index.asp
will tell ya the birds and the bees of suspension tuning
will tell ya the birds and the bees of suspension tuning
#352
so how do you adjust casator???
#353
Originally posted by MiSFitSLvR
so how do you adjust casator???
so how do you adjust casator???
#354
what after market chassis would you guys recommend for the pro3 im trying stiffen it up as much as i can for carpet racing i have just been running the carbon composite chassis that hpi makes but i want somthing a little stiffer. just bought the carbon fiber shock towers, top deck ,aluminum bulkheads and layshaft mount. anything else i should get?
#355
Tech Champion
iTrader: (9)
Woven narrow graphite chassis. avialable from RcModel in HK.
http://shopping.rcmodel.com.hk/eshopping/default.htm
also get the new 3 or 4 degree C-blocks. you will be able to exit corners alot faster. I have 1 set of 4deg. C-blocks to sell if you're interested. let me know by friday.. goes into auction on monday.
http://shopping.rcmodel.com.hk/eshopping/default.htm
also get the new 3 or 4 degree C-blocks. you will be able to exit corners alot faster. I have 1 set of 4deg. C-blocks to sell if you're interested. let me know by friday.. goes into auction on monday.
Last edited by rc-zombies; 03-21-2002 at 10:37 AM.
#356
k thx, maybe ill get those c hubs, how much. also what are the new hubs released, just 3 and 4 degree?
#357
that chassis is nice im thinkin i might get in a couple weeks. who makes it ?
#358
Tech Champion
iTrader: (9)
Originally posted by spaz456
k thx, maybe ill get those c hubs, how much. also what are the new hubs released, just 3 and 4 degree?
k thx, maybe ill get those c hubs, how much. also what are the new hubs released, just 3 and 4 degree?
Don't know who makes the chassis. Looks like a great copy of the Kai chassis that had limited released last year.
#359
alright 10 bucks shipped. do you have email or anything. i think i might either get the penguin chassis or that narrow carbon graphite one plus some other hop ups from rcmodel do you know what the average shipping is from there or is it calculated individually on weight. thx
#360
Tech Champion
iTrader: (9)
email me at [email protected]
you can use that address for PayPal also.
It cost around $10.00 for registered airmail from HK just for the chassis. $15.00 EMS priority. 3-4 day delivery air is 7-10days.
Shipping is based on weight.
Personally I think the Narrow chassis is better. The HB narrow chassis is very similar in design but won't be released til May or June.
you can use that address for PayPal also.
It cost around $10.00 for registered airmail from HK just for the chassis. $15.00 EMS priority. 3-4 day delivery air is 7-10days.
Shipping is based on weight.
Personally I think the Narrow chassis is better. The HB narrow chassis is very similar in design but won't be released til May or June.