NTC3Crazy

Should work then, the HPI .18.

I found this link http://archive.hpiracing.com/hpikits/rc

Team Kamikaze

iTrader: (3)

That is actually called a side exhaust engine.

Rapid Roy

Kamakaze is correct, that is a side exhaust setup. You are getting a bit confused because it exits out of the rear of the car. The rear exhaust we refer to here is the position of the exhaust port on the engine block. When the exhaust comes out directly opposite the crank, its a rear exhaust. If the exhaust comes out 90 degrees from the crank, is a side exhaust. You are going to need a new pipe and header. The stock setup you have right now does not perform well at all and will rob you of power. If you really want to use that exhaust, you will want somthing like this in a motor.
http://www.hpiracing.com/products/en/15107/

eclipser

oh s**t see i learned something new
do what a rear one look like?

Rapid Roy

You really need to click on the links I have been posting for you to look at.

eclipser

lol i think me and you posted almost at the same time
sorry i didnt see it

Rapid Roy

I'll post it for you again.

http://www.kamikazercracing.com/prod...r12plusexhaust

eclipser

ohh that one
it dosent let me see the pictures on that site im on schools internet
but i get i though

NTC3Crazy

Rapid Roy,

That engine is overkill, why can he not go with the HPI 18? It should drop right in and he would be able to use the same exhaust.

Rapid Roy

He had another thread where he wanted to drop a .21 or the fastest engine he could get. Wanted to go really fast. I was just trying to answer him. I posted in the other thread that the OS .18 would be overkill too.

NTC3Crazy

Then he is probaly better off with the .15