Xray X1 - Formula One Car
#466
Do F103 wings mount directly onto the X1?
#467
X1 Instruction Manual V2
Is this perhaps the reason why the bladder does not fit the shock cap properly?
RX8 RX8 2013 XRAY 308082 - T4 SHOCK ABSORBER MEMBRANE (4)
XRAY T3 2011 XRAY 308081 - SHOCK ABSORBER MEMBRANE - LOW (4) updated parts
RX8 RX8 2013 XRAY 308082 - T4 SHOCK ABSORBER MEMBRANE (4)
XRAY T3 2011 XRAY 308081 - SHOCK ABSORBER MEMBRANE - LOW (4) updated parts
#468
Tech Regular
the last time I ran my Tamiya F104, my fast lap was a 10.6 and an average of 11.4, On the same track with the stock X1 setup I ran a fast lap of 9.96 and an average of 10.35 so not only was I faster with the X1 but also more consistent. the car is easy to drive and easy to push hard for fast lap times. by far the BEST F1 I have driven......so glad I got an X1 over the others I was considering. I used Pits 571/572 hooked up awesome.
which other F1s you have experience with?
#470
the last time I ran my Tamiya F104, my fast lap was a 10.6 and an average of 11.4, On the same track with the stock X1 setup I ran a fast lap of 9.96 and an average of 10.35 so not only was I faster with the X1 but also more consistent. the car is easy to drive and easy to push hard for fast lap times. by far the BEST F1 I have driven......so glad I got an X1 over the others I was considering. I used Pits 571/572 hooked up awesome.
#472
This was told to me by Brano Bulko on the Xray forum.
http://forum.teamxray.com/viewtopic.php?f=109&t=18952
#473
Battery not fitting ?
What batteries are everyone using ?? I have just built mine and I have to push the carbon to get it to fix - not really happy having to squeeze it into the car every time - currently using the Orion battery in the transverse direction (rear)
Thanks
Mike
Thanks
Mike
#474
If you put them in with one side a little bit to the front, it will go right in.
#477
Tech Elite
iTrader: (9)
#478
Tech Master
iTrader: (42)
#479
Does anyone have a setup for Medium grip asphalt by chance?
#480
...
Last edited by skipstr; 01-23-2015 at 08:31 AM.