Hot Bodies Cyclone
Tech Elite
iTrader: (92)
I have an almost brand new Cyclone TC setup, Let me know if any of you are interested. Thanks!
http://www.rctech.net/forum/r-c-item...d-passion.html
http://www.rctech.net/forum/r-c-item...d-passion.html
Tech Fanatic
iTrader: (1)
I've never used the BL mount myself. Just going on what the HB guys have said before about the BL mount and what the HPI site says. It may have something to do with the fact that the largest HB spur is only 110. Another brands 111, 112 or larger may be able to squeeze in there fine.
Tech Champion
iTrader: (32)
110-111 spur using the brushless motor mount. 112 sticks thru the bottom of the chassis sli
ghtly. You can go slightly larger but it will stick out of the bottom and the other thing to look for is the spur gear hitting the rear FRP/graphite plate.
ghtly. You can go slightly larger but it will stick out of the bottom and the other thing to look for is the spur gear hitting the rear FRP/graphite plate.
Tech Master
iTrader: (17)
My 107 sticks out the bottom on the stock mount. I'm pushing a 9.-- final drive using the 16 tooth pulleys.
Tech Champion
iTrader: (32)
Tech Master
iTrader: (17)
Tech Champion
iTrader: (32)
On the std motor mount, 108 is the absolute max and that's flush if not slightly out the bottom deck.
On the brushless motor mount, I you can get about 116 fitted, I run 115 and that's got enough clearance to be safe
hth
Luke
On the brushless motor mount, I you can get about 116 fitted, I run 115 and that's got enough clearance to be safe
hth
Luke
Tech Fanatic
iTrader: (1)
WOW I've been using Xray and the purple HPI 116-64p spur gears for more the 3 years with the optional HB BL motor mount. I'm now using the lipo mount with the 2mm spacer that comes with it.
Yes I had to take a little off the RTP but the 116 will NOT stick out past the bottom of my 2 HB V1,V2 & 1 BMI chassis AT ALL.
Yes I had to take a little off the RTP but the 116 will NOT stick out past the bottom of my 2 HB V1,V2 & 1 BMI chassis AT ALL.
Last edited by Lazer Guy; 06-09-2010 at 07:56 AM.
I just picked up a Cyclone TC that I plan on running in my clubs 17.5 TC class. I have a Ballistic 17.5/Havoc Pro ESC and a SMC 4200 for power. The track is aprox. 60x36.
What would be a good starting point for FDR? The Ballistic specs call out a FDR of 4. But I think that will be too high for the size of our track.
What would be a good starting point for FDR? The Ballistic specs call out a FDR of 4. But I think that will be too high for the size of our track.
wow! the 116T?
perfect!
I will put 114 for the maximum safe!
thanks a lot!
perfect!
I will put 114 for the maximum safe!
thanks a lot!
Tech Master
iTrader: (17)
116T is five wheel ?
Tech Champion
iTrader: (32)