JConcepts
01-22-2009, 06:25 PM
#361
01-22-2009, 08:05 PM
#362
01-23-2009, 01:45 PM
#363
Nice 2.0 losi body, it looks better then their factory body that comes with the car!!!
Good job as always JConcepts!!!!
Good job as always JConcepts!!!!
Thanks!
01-29-2009, 01:32 AM
#369
Some pics of the new JConcepts body and wing for my 808.
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
01-29-2009, 07:17 AM
#370
Some pics of the new JConcepts body and wing for my 808.
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
02-02-2009, 06:16 AM
#372
Some pics of the new JConcepts body and wing for my 808.
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
Painted ready for the Victorian State Championships which is part of the Australian Championships.
The buggy is powered by JX21 B01 Ninja with 7mm sleeve and EB mods button.
This is the 4th body i have ever painted (2x on the Baja and the original 808 body over on the left there near my name. Also my first go at the Carbon Fibre look that i am pleased with!
03-20-2009, 05:44 AM
#375
Hi Andy,
Would you be so kind to check the side clearance of your body and let me know which one would clear the LRP Sphere Heat Sink?
I am also purchased several packs of your white ball cups. I am using the Ball Studs from Hot Bodies Cyclone TC on my T4 and B4, because they are much easier to deal with with a hex allen wrench, instead of nut drivers. I just want to check with you to ensure that your ball cups would fit the Cyclone ball studs properly. The stock associated ball cups do fit properly.
I love your stuffs.
Thanks.
Would you be so kind to check the side clearance of your body and let me know which one would clear the LRP Sphere Heat Sink?
I am also purchased several packs of your white ball cups. I am using the Ball Studs from Hot Bodies Cyclone TC on my T4 and B4, because they are much easier to deal with with a hex allen wrench, instead of nut drivers. I just want to check with you to ensure that your ball cups would fit the Cyclone ball studs properly. The stock associated ball cups do fit properly.
I love your stuffs.
Thanks.