ziggy12345

Its been a long time since i installed it

Cheers

adlawoo

and that goes to the front and I'm running 1.5mm tire split

BrainTeased

iTrader: (4)

may i ask where the notch is located im also running the center conversion.

Marcos.J

iTrader: (239)

THANKS FOR THE TIP , 1.5 MM LESS IN THE FRONT.

uaerc

Hi there

I wanted to know if anyone has installed two brake disk on their FW.... If yes..

Can you please let me know what parts were used or any mods. done...

I need to increase my stopping power since i have a very tight track and most of the turns are almost U turns.

cheers
ZiiZo

NiMo

Use the APP02 brake set, I've not yet had any brake fade with it, and can easily lock the wheels if I over adjust it.

SRAD

iTrader: (15)

Hello.....my question is....I see the new RR is on sale already overseas. I heard someone say that for the bigger tracks the car is undergeared. Is this true. Also does the RR come with the .08 gears. Thanks

NiMo

yes it is

Quote:

I heard someone say that for the bigger tracks the car is undergeared. Is this true.

The cars overal gearing can easily be changed, car comes as standard with 40T Diff rings, you can get these in 39T,38T,37T and also the Kawahara 0.8 45T,46T.
I have run my car at a track with the 45T and 26 pinion (27,28 available) where speeds are over 60mph, and it was still picking up speed.

Quote:

Also does the RR come with the .08 gears. Thanks

Pinion gears - all the FW05 range comes with 0.8 gears.
Diff Rings - no. only the Kawahara is 0.8

NiMo

Whether you like 3racing or not (some parts are good) I think you'll like this one.

quick change centre bulk




Also coming are SSG deck and towers

rjl

Once again, it is very easy to overgear the car with the Kawahara centre conversion, lots of engine heat and no revs. For me 21-26 is more than enough gearing on a looooooong straight!

Marcos.J

iTrader: (239)

that looks awesome!!!

adlawoo

QUOTE]Originally posted by Marcos.J
THANKS FOR THE TIP , 1.5 MM LESS IN THE FRONT. [/QUOTE]

yup...less in the front


along the bevel shaft/rod

SlayerFan

Hey guys, I was wondering if anyone has or knows anybody who has the manual for the ZT-1 conversion kit for the FW-05? I will be interested in buying it from whoever has it and wants to let it go... Thanks!!

cow buster

Anyone have problem with the throttle servos? there seem to be a lot of em' burning up at our track. The guys experiencing this are using sanwa radios.

Nimo, have you got that problem?

Whether it is digital or analogue it burns. I personally have not burn one yet (hope not anyway) and I was previously using a futaba radio with futaba servos. Just changed to a sanwa radio M8. Any advise is much appreciated

SlayerFan

Nobody has the manual for the ZT-1 conversion kit???