Ask Aaron Waldron
#2266
maybe dial out some drag brake, try to limit front chassis roll..or at least I think so. Stiffer springs, heaver oils, smaller holes in piston. Anything to stiffen the front up some should help. Slipper may help too, what tires do the fast guys run at your track?
#2268
Id go with a little heavier front oil maybe 35 or 37.5 wt. I may also try to lighten the rear, go inside a hold on tower or out one on the arm, maybe some lighter springs. This is what I would do, see what some other guys say on here and see what they say too.
#2270
Another important thing when learning (somthing im still doing) Is to take advantage of your practice time. If you notice something, change it in practice and see if it works. If you noticed something in the main, change it after the race and have it ready for practice the next week. Keep records and data of your changes and how the helped/hurt the characteristics of the car. Good luck..hope I helped some.
#2272
make sure the rear arms are level/dogbones above level. try running 2B front & rear camber link. what engine are you running, remember to ease onto the throttle, after the truck squares up, do not punch it.
Last edited by dkj-M3; 03-15-2005 at 09:14 AM.
#2273
Originally posted by dkj-M3
make sure the rear arms are level/dogbones above level. try running 2B front & rear camber link. what engine are you running, remeber to ease onto the throttle, after the truck squares up, do not punch it.
make sure the rear arms are level/dogbones above level. try running 2B front & rear camber link. what engine are you running, remeber to ease onto the throttle, after the truck squares up, do not punch it.
#2274
AW's setup xxxtmf2
Aaron,
I have some questions on ur setup ...
7's = 57 black or drilled?
spindel location?
are .9 shafts necessary or can one use more shims?
6's = 56 pink/red or drilled?
What inserts do you use for SRS B.G. stock truck
stk foam in the front and tri bomb1 or proline preglued 2 stage?
Thanks,
E
I have some questions on ur setup ...
7's = 57 black or drilled?
spindel location?
are .9 shafts necessary or can one use more shims?
6's = 56 pink/red or drilled?
What inserts do you use for SRS B.G. stock truck
stk foam in the front and tri bomb1 or proline preglued 2 stage?
Thanks,
E
#2275
fuel filter - do the built in fuel filter inside the tank is enough or is it a must have another fuel filter that nowdays almost all the new car have it in their package
#2276
Tech Regular
AW
what do you think of rpm two stage pistons???
I got beat by the truck you used at thunder alley race, this past weekend LOL
what do you think of rpm two stage pistons???
I got beat by the truck you used at thunder alley race, this past weekend LOL
#2278
Originally posted by arghh
fuel filter - do the built in fuel filter inside the tank is enough or is it a must have another fuel filter that nowdays almost all the new car have it in their package
fuel filter - do the built in fuel filter inside the tank is enough or is it a must have another fuel filter that nowdays almost all the new car have it in their package
the filter in the tank works fine. no need to add another.
#2280
Maybe?Maybe not?Who knows,who cares,now i can fill his spot and have all those sponsors.