The Speed Passion Thread
#7037
AWSOME , gonna try this out at the weekend , hope my buggy flies with it
#7038
Tech Addict
guys, this new s/w gives you brakes from helll~! i have mine set at 50%, reverse force off, and drag brakes off! i still have to adjust a bit with my transmitter.
rich
rich
#7039
Tech Champion
iTrader: (17)
BRAKE JUST SLOW YOU DOWN!!!!
I am just kidding...but with this brake improvment, on both ON ROAD and OFF ROAD, it is a HUGH advantage (and I heard this is something extremely important in OFF ROAD)...
Enjoy it...
#7040
hmm to complicated
is it posible to make a comparisment from the 528 stock max seting to were the new should be to get the same resuld?
so i now where to start faster to understand for me and learn.
my 528 was wicked fast already
is it posible to make a comparisment from the 528 stock max seting to were the new should be to get the same resuld?
so i now where to start faster to understand for me and learn.
my 528 was wicked fast already
#7041
Tech Champion
iTrader: (17)
323STOCK setups are here
OK....I spend quite some time to gather all the setup I have so far for both ON ROAD and OFF ROAD...mainly are for stock. But with the 323STOCK software...it is kinda confused. Because I have driver use the same car from STOCK and actually raced in MOD...same thing, running the STOCK MOTOR on MOD then back to the open stock with the same setup and gearing.
I don't know how to tell you guys....TRY IT. If you are confused...don't blame me, blame those who created BOOST....
All the new 323stock setup are here...find the class you want, I have SCT mod 8,5, to 2WD stock 17.5, 4WD mod with 8.5, TC 17.5 open, indoor carpet, outdoor asphalt, 13.5 and 10.5....
http://www.speedpassion.net/us/escsetup.asp
OK....I spend quite some time to gather all the setup I have so far for both ON ROAD and OFF ROAD...mainly are for stock. But with the 323STOCK software...it is kinda confused. Because I have driver use the same car from STOCK and actually raced in MOD...same thing, running the STOCK MOTOR on MOD then back to the open stock with the same setup and gearing.
I don't know how to tell you guys....TRY IT. If you are confused...don't blame me, blame those who created BOOST....
All the new 323stock setup are here...find the class you want, I have SCT mod 8,5, to 2WD stock 17.5, 4WD mod with 8.5, TC 17.5 open, indoor carpet, outdoor asphalt, 13.5 and 10.5....
http://www.speedpassion.net/us/escsetup.asp
#7042
Tech Champion
iTrader: (17)
323STOCK is the 3rd gen open esc software, totally new...it is 528 fast times 2.
Read the attached PDF and tried to understand....if you don't, just use 1 of my setup and try it.....you don't have to understand if you are WINNING, right?
#7043
Really...forget about the 528, it is so 2010....
323STOCK is the 3rd gen open esc software, totally new...it is 528 fast times 2.
Read the attached PDF and tried to understand....if you don't, just use 1 of my setup and try it.....you don't have to understand if you are WINNING, right?
323STOCK is the 3rd gen open esc software, totally new...it is 528 fast times 2.
Read the attached PDF and tried to understand....if you don't, just use 1 of my setup and try it.....you don't have to understand if you are WINNING, right?
thats right
i have the speedo programed and calibrated.
have a setup in it after programing. is this the start setup?
#7044
Can i use a 6.5 motor with the new 323 softwere in my T3 or is it better to use the new 119 mod softwere ?? If so do you have a rough set up jet ??
#7045
Tech Apprentice
Could someone tell me which software is best to use that doesnt have a supercharger/turbo , such as the old 110 and 107 software
I heard use 205 MOD but im not sure as i have a 13.5T motor
Thanks for any advice
I heard use 205 MOD but im not sure as i have a 13.5T motor
Thanks for any advice
#7048
Tech Rookie
Hi,
i've just downloaded the latest firmware. Can some one recommend a setup for 4wd off road with a 5.5 v2 sp motor.
Thanks
Matt
i've just downloaded the latest firmware. Can some one recommend a setup for 4wd off road with a 5.5 v2 sp motor.
Thanks
Matt
#7049
i mean after i put the 323 stoch software in my speedo and recalebrated it.
al the seting are not at zero. like boost timing was on 36 deg and turbo timing
at 24 deg boost start rpm at 4000. boost timing aceleration at 350 rpm/deg
and so
is tis normal that it starts with tis setings after programing the 323 sw.
thanks again
#7050
hey solara.
i mean after i put the 323 stoch software in my speedo and recalebrated it.
al the seting are not at zero. like boost timing was on 36 deg and turbo timing
at 24 deg boost start rpm at 4000. boost timing aceleration at 350 rpm/deg
and so
is tis normal that it starts with tis setings after programing the 323 sw.
thanks again
i mean after i put the 323 stoch software in my speedo and recalebrated it.
al the seting are not at zero. like boost timing was on 36 deg and turbo timing
at 24 deg boost start rpm at 4000. boost timing aceleration at 350 rpm/deg
and so
is tis normal that it starts with tis setings after programing the 323 sw.
thanks again