Xray T2'007
#1502
Anybody know where I can get an Xray pit hauler bag? One I can put all my stuff in to haul around to races?
#1503
Tech Master
iTrader: (37)
Originally Posted by Deves
Anybody know where I can get an Xray pit hauler bag? One I can put all my stuff in to haul around to races?
Don't know about a XRAY bag, but if you want the best of the best........then you can't beat the one made by Team Magic!!!
Team Magic F8 Hauler bag
Fits everything you need to go racing with and then some!!!
#1504
Tech Champion
iTrader: (73)
Originally Posted by rmargiotta
If you ONLY have Asc or Trinity oils, use 50 wt. That's about equivalent to 30 wt. XRay...
I just rebuilt my shocks and was out of the 30 that came with the kit, so I used the AE I had, I guess it did seem a bit thinner.
#1505
Tech Rookie
So I should use the same weight oil front and rear? Never had a car that was the same front and rear that is why I ask.
Thanks again
Thanks again
#1506
Tech Elite
iTrader: (8)
In most cases, the Xray 30 wt is good for just about every surface out there with a few piston hole tweaks to get a different oil feel front to rear. In general, I run 3 holes open front and rear in rubber, and 2 holes open in foam. Everyone has their own flavor of how a car should feel and whats fast for them.
#1507
TWEAK PLATE
Does the IRP tweak plate for the T2 align up correct for the T2 007?
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
#1508
Tech Elite
iTrader: (6)
Originally Posted by dal bains
Does the IRP tweak plate for the T2 align up correct for the T2 007?
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
#1509
Tech Elite
iTrader: (41)
Originally Posted by dal bains
Does the IRP tweak plate for the T2 align up correct for the T2 007?
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
I have had problems with my setup boards being out of wack so when i rebuild my car the chassis was bowed because of that.
#1510
Tech Master
Originally Posted by HarshGuy
It has NOTHING to do with the 18 beers the night before
#1511
crash
What about the double axial barrel roll across the track?
#1512
Originally Posted by AARON YOUNG
What about the double axial barrel roll across the track?
the car worked awesome once it was figured out that the pit board was not level!!!!
and i drove very clean!!!
#1515
Originally Posted by Xtreme_Lee
Just picked up a 007 and the shocks look to be built with the 3 hole non adjustable pistons. What shock oil should I use with these. I only have AE and Trinity oils no X-Ray. I am running on Med Bite Ozite with foams. Thanks
wt..........losi...................associated
20..........0......................0
25..........0......................0
30..........All similar...........All similar
35..........0.....................463
40..........559..................552
45..........0.....................0
50..........760..................709
55..........0......................0
60..........920...................883
70..........988...................1050
80..........1140.................1044
90..........1335..................0
100........1470...................0
wt.............hudy......trinity
20.............0............0
25.............0............0
30.............378.........0
35............ 662.........373
40.............1030.......0
45.............1485.......0
50.............2482.......0
55............ 0............750
60.............0............0
70.............0............755
80.............0............862
90.............0............0
100...........0............0
Last edited by chicky03; 01-17-2007 at 08:03 AM.