Jimmy Morris

iTrader: (9)

try giving superior hobbies a call. 407-834-9299

transplantlife

iTrader: (47)

I spoke with robbie today and nadda ive found a set already.

Jimmy Morris

iTrader: (9)

front
45 wt ae oil
tamiya white springs
tamiya 3-hole pistons
.5 blocks dots out
silver sway bar
inner hole on 07 lowered tower
outer most hole on arm
4mm droop measured under c hub
4* caster
long wheel base
spec r gear diff with cleaning clay
-1.5 camber

rear
45 wt ae oil
tamiya yellow springs
tamiya 3-hole pistons
inner most hole on lowered 07 tower
inner most hole on arm
4mm droop measured under set screw
2.0 FR block dots out
0 RR block
silver sway bar
long wheel base
spec r gear diff 1000 cst
ball stud in outer hole on rear hub
-1.5 camber

transplantlife

iTrader: (47)

Jimbo thanks for taking the time to list your set-up!

brians11

iTrader: (40)

I think 2.5 is correct, but I'd have to measure when I get the chance. When I have ran ceramic diff balls, I've needed to leave the diff rings a little rougher as the ceramics seem to slip a little more on the rings if they are too polished with fine sand paper.

Rodasfer

My mistake. Sorry
HMX uses 2.5mm diff ball
I use Muchmore diff grease with 4 Diff Washers.
2.5mm corally diff ball

Does anyone use 2.4 chassi on asphalt
The hmx with 2.0 chassi twists alot
Br,
Rodrigo

MAD916

Think we may have 07 parts in stock at www.timeonehobbies.com. But am away from shop today. Take look we had pretty good collection of phi and Rex stuff

transplantlife

iTrader: (47)

do any other sway bars work on this car?

Kensei

As I see it FDR3.5 can be made with 66/32. 32T Being the biggest Corally pinion. FDR would be 3.526875 that way. Can it be meshed the proper way on the HMX? If so I am going that way.
Haven't you raced FDR3.5 yet?

68/33 Is not an option imo because Corally has no long boss 33T pinion.

All of that knowing that I want to use 48Dp.

10SL racing has come to an end for you? I see you race HMX at the Dutch nationals as of this year.
I am still interested in pro10 racing but the number of drivers at the Dutch nationals is decreasing every year.
RC LeMans might be an option.

wuzi

Tamiya 3 holes are to smal for corally shocks

spacendeman

Hi,

FDR 3.52 also an option so you then can get those gears.. I haven't tried the normal pionions yet , so maybe someone can give an awnser to that.

Still have my 10sl. But this year I'm driving HMX. Maybe next year also some rounds with my 10SL again. Maybe indoor ...

transplantlife

iTrader: (47)

Anyone know the part # for the 510mm drive belt? or what other drive belt will work when using tamiya ta05 gear diffs.Thanks

BJohnson

510mm rear belt part # 79135. Hope this helps.

theatriks

iTrader: (8)

does anybody know who sells these in the usa or preferreably canada?

transplantlife

iTrader: (47)

try giving superior hobbies is corally usa a call. 407-834-9299 ask for tj they dont have any kits in stock at the moment there waiting on the v2 kits coming