rcmnx

Anyone know what's the best setting for IB3600, 3800 or 4200 on LRP Pulsar 1 charger.
Please share with me....

Thanks

killer89

iTrader: (41)

6-7 amps, 10mv cutoff...

Roberto Falcon

iTrader: (18)

my pulsar 2 is set at 6amps 55 or 50mv cut off

killer89

iTrader: (41)

WOW... Thats a little high for the cutoff no? Are you talking about IB batts? of NiCDs? what do the peak temp at?

rcmnx

--

rcmnx

Thanks for the info.
with 6 amp and 50mv cut off will it be too hot to touch for stickpack ?

I think 6-7 amp with 10mv is safer...

SMC battery recommend their IB3800 match with 6 amp 20-30mv but I don;t know which charger they (SMC) refer to.

What's the final maH read in the display for IB3600, 3800 or 4200 ?

killer89

iTrader: (41)

my 3800s take 4300mah

Roberto Falcon

iTrader: (18)

I use IB3800's.. and they just get warm

rcmnx

Thanks...

I only charge the stickpack... standard cell.
No match side-by-side...

Will try it...

ridgewaybodies

iTrader: (42)

I'm using the Competition 2, but for my 3800's, I set my cut off between 30-35mv right now. The ambient temp is 50-60 degrees at the track. I will set it lower if the ambient temps are warmer or if my batteries peak above 125 degrees.

killer89

iTrader: (41)

ambient temp for me is about 60-70 at my track...

rcmnx

HOw do you know the temperature of your batteries ? Does the Pul Comp 2 comes with the temp probe ? or do you use temp gun ?

jw92656

No the LRP Pulsar2 does not come with a temp guage. I just picked up a DuraTrak one for $24.00. Check the temp on each cell, they will have different temps, and adjust your Delta Peak accordingly to your hottest cell. To lower the temp, lower the delta peak. To raise it, raise the delta peak mV.