Capricorn LAB C801 1/8 scale
05-17-2011, 08:52 AM
#286
Tech Regular
iTrader: (1)
The Lab-C801 had a good week
Dario wins in Italy
http://www.redrc.net/2011/05/dario-b...-rd1-in-italy/
Dario wins in Italy
http://www.redrc.net/2011/05/dario-b...-rd1-in-italy/
05-21-2011, 04:38 PM
#288
Where was that piece last week? Lol.
05-21-2011, 04:57 PM
#289
05-22-2011, 09:50 AM
#291
Tech Rookie
Hello,
I just saw this new: "Shock absorber REAR kit black colour"
What's different with the original ones?
I just saw this new: "Shock absorber REAR kit black colour"
What's different with the original ones?
05-22-2011, 10:45 PM
#293
Tech Regular
C801 takes the win at Kosmic GP 
05-23-2011, 05:20 AM
#294
05-23-2011, 06:14 PM
#295
Very Impressed
05-27-2011, 09:47 AM
#296
Tech Adept
New release 1.1
1.1 instruction manual
New setup
New optional parts instruction
http://www.capricornrc.com/capricorn...al-rel-1.1.pdf
New setup
New optional parts instruction
http://www.capricornrc.com/capricorn...al-rel-1.1.pdf
05-30-2011, 11:25 AM
#297
Tech Rookie
guys, just wondering if any of you have problems when building the shocks. I mounted a set of new wheels (un-trim) but cannot seem to be able to get the car to touch the ground even when I squirted the car to it's lowest position. I used the medium ball joint at the front and long ones at the rear. I solved the problem by cutting the ball joints shorter by around 2mm front and rear. Did any of you had the same problem? 
05-30-2011, 12:39 PM
#298
guys, just wondering if any of you have problems when building the shocks. I mounted a set of new wheels (un-trim) but cannot seem to be able to get the car to touch the ground even when I squirted the car to it's lowest position. I used the medium ball joint at the front and long ones at the rear. I solved the problem by cutting the ball joints shorter by around 2mm front and rear. Did any of you had the same problem?
BUY THIS http://kamikazetoysandhobbies.com/pr...php?prod=2097L
The one that comes with the car is very small and limits suspension travel.
05-30-2011, 12:40 PM
#299
guys, just wondering if any of you have problems when building the shocks. I mounted a set of new wheels (un-trim) but cannot seem to be able to get the car to touch the ground even when I squirted the car to it's lowest position. I used the medium ball joint at the front and long ones at the rear. I solved the problem by cutting the ball joints shorter by around 2mm front and rear. Did any of you had the same problem?
replace this part = 2097L
05-30-2011, 02:11 PM
#300
Tech Regular
guys, just wondering if any of you have problems when building the shocks. I mounted a set of new wheels (un-trim) but cannot seem to be able to get the car to touch the ground even when I squirted the car to it's lowest position. I used the medium ball joint at the front and long ones at the rear. I solved the problem by cutting the ball joints shorter by around 2mm front and rear. Did any of you had the same problem?