Serpent 733 1/10 200mm touring
#2432
is there a way to tell which ones you got?
#2434
Yeah it got alot better with the changes i made and the new motor and two speed finally came in....oh and thanks for the sick paint work Smiley, ive never seen a body turn out so good for a 24 hour turn around! i hope someone got some action shots.....here's a pic before stickers.....please ignore the ugly guy in the pic (me)...focus only on the paint
P.S dont forget that i want you to do all my bodies including the one that jeremy's going to give you later this week. Keep up the good work!
P.S dont forget that i want you to do all my bodies including the one that jeremy's going to give you later this week. Keep up the good work!
#2435
Tech Regular
iTrader: (1)
Hey so yesterday I finished installing an RB Concept R3 That was modded by Rick Brake himself it now has 5 PORTS and should be freaky fast... We shall see!
My question is do you guys running the 733 usually change anything on your setup when you run an engine that you know will run faster??? Since the car will get from corner to corner quicker?
My question is do you guys running the 733 usually change anything on your setup when you run an engine that you know will run faster??? Since the car will get from corner to corner quicker?
#2436
Tech Elite
iTrader: (12)
Hey so yesterday I finished installing an RB Concept R3 That was modded by Rick Brake himself it now has 5 PORTS and should be freaky fast... We shall see!
My question is do you guys running the 733 usually change anything on your setup when you run an engine that you know will run faster??? Since the car will get from corner to corner quicker?
My question is do you guys running the 733 usually change anything on your setup when you run an engine that you know will run faster??? Since the car will get from corner to corner quicker?
#2439
Tech Initiate
Lube for one way bearing?
So don't forget to lube it before first usage...
Isn't any form of grease actually to "sticky" for the needles?
Or is the grease you are talking about more a sort of an oil?
And doesn't the one way lube work good enough?, or do you need to relube it to often then.
I know the one way lube works perfect one the "older" type of one ways....
Isn't any form of grease actually to "sticky" for the needles?
Or is the grease you are talking about more a sort of an oil?
And doesn't the one way lube work good enough?, or do you need to relube it to often then.
I know the one way lube works perfect one the "older" type of one ways....
Serpent fan
#2440
http://www.rctech.net/forum/6349568-post1169.html
#2441
Tech Initiate
One Way bearing lube
I have the newer one with the tight fit.
If I can use Diff oil, which one should I use? The thickest one, or the thinnest one?
If I can use Diff oil, which one should I use? The thickest one, or the thinnest one?
#2443
Tech Initiate
I don't know of any of those. The black grease, is that something that came with the kit?
So basically I want a rather thick grease, so that it won't get flung straight out?
Can I take some grease from a bucket at work? It's the kind of grease that does not run, it has a pretty high viscosity.
#2444
Tech Elite
iTrader: (19)
I don't know of any of those. The black grease, is that something that came with the kit?
So basically I want a rather thick grease, so that it won't get flung straight out?
Can I take some grease from a bucket at work? It's the kind of grease that does not run, it has a pretty high viscosity.
So basically I want a rather thick grease, so that it won't get flung straight out?
Can I take some grease from a bucket at work? It's the kind of grease that does not run, it has a pretty high viscosity.
#2445
Tech Initiate
Ah, ok. Thanks for you help
Will this one do for example?
http://www.globy.no/page/products/142224/
Do I have to take the "gearbox" apart to put the grease on? Where exactly do I put the grease? (I sound like a newbie because I am one )
Will this one do for example?
http://www.globy.no/page/products/142224/
Do I have to take the "gearbox" apart to put the grease on? Where exactly do I put the grease? (I sound like a newbie because I am one )