Castle Mamba Monster Motor and Esc Met a Pool
#1
Castle Mamba Monster Motor and Esc Met a Pool
So my e revo brushless had a nasty crash and landed in my pool after a death roll lasting like 200 yards so I am wondering if my motor is junk like the esc is now
any adivce please let me know and i should mention the esc smoked and flamed and melted part of my body
any adivce please let me know and i should mention the esc smoked and flamed and melted part of my body
#3
Esc your screwed just send it to Castle . The Motor is good i think just the bearings are shot .
Devil: I figured out how to make the Mamba Monster smoother to feel somewhat like a sensor system and thats using the expo on my radio to negative -4 it helped with wheelspin out of the corners when the dirt is dry.
Im not sure if thats the samething as punch control but from talking to somebody at the track it sounds like the same.
Devil: I figured out how to make the Mamba Monster smoother to feel somewhat like a sensor system and thats using the expo on my radio to negative -4 it helped with wheelspin out of the corners when the dirt is dry.
Im not sure if thats the samething as punch control but from talking to somebody at the track it sounds like the same.
#5
#8
#10
Tech Regular
Motors require high speed bearings, a standard bearing won't handle 30000+ RPM without flying to bits.
#11
Tech Master
iTrader: (3)
#12
Okay good deal so I need two bearings...dumb question you think those bearings are ceramic??
Okay found out they are cerAmic bearings and have dimensions of
Id 5mm x OD 16mm x 5mm width
So now the task becomes finding them cheaper than 25.00 for two bearings
Okay found out they are cerAmic bearings and have dimensions of
Id 5mm x OD 16mm x 5mm width
So now the task becomes finding them cheaper than 25.00 for two bearings
#13
A little more than a dollar, but you might be looking for these Avid bearings.
http://www.avidrc.com/product/17/mot...-bearings.html
http://www.avidrc.com/product/17/mot...-bearings.html