GUINT1

Yes i have tried it...

captian

yes get it ready for next year fun in tc my 720 is getting ready

oderem

after trying for a while adjusting the clutch my engine is still engaging too late on the rpms, if i add little screws like on the orion clutch, will the extra weight help the clutch to engage sooner?

mrgsr

iTrader: (15)

how did you like it?>
any info please ?

GMartinez

iTrader: (91)

try www.rc-mushroom.com they might have it

maskedrider

iTrader: (4)

anyone have the kyosho alum rear belt puller parts number ?
the plastic pne seems wearing out fast....


thanks

bjones

hi everyone
dont know if you can help me but need a hand setting my RRRWCE up for my local tar carpark track. running 37s all round the car is very unstable under brakes and very loose in rear on exit. The car coming around a sweeping straight will kick out in the rear causing me to spin out. through the tighter part of the track the streering pushes abit should i be going for a softer set up all round or harder.

thanks in advance

fastrcracer

Has anyopne ever broke the pins holding the drive pulley on the 2-speed shaft ?

Broke two this past weekend.

Any help would be appreciated.


Thanks

bjones

does anyone know if this part fits the rrr wce

http://rc-mushroom.com/product_info....ducts_id=11578

thanks

robert maestrey

absolutley

1FastVW

Yes, It's happened to me once. I think it occurs in particular when you use the the aftermarket aluminum 3racing drive/brake pulley combo. Both the acceleration and braking forces are on one pin instead of the 2 separate pins (1 for drive pulley & 1 for brake cam).

GUINT1

Yes Mmgsr:
the solid from 3racing is good, but i only use the solid on small tracks
or real technical tracks. (four wheel braking) Also. If you use the solid you must be extra careful not to hit the boards a lot.
Its not very forgiving on the universal if you use them..
I broke 3 sets of them while trying to dail my car in.lol $40. a pop.

GUINT1

Hey captian

Whats good. Dont worry im ready for some TC action in 07.

GUINT1

Hello: bjones

Yes all of those parts work well.
As far as the adjustable swaybar. The kyosho one works better.
(go wit that one). Was useing Kawaharra swaybar a bit large. but good to use if you cant get the kyosho one.

bjones

hi everyone
dont know if you can help me but need a hand setting my RRRWCE up for my local tar carpark track. running 37s all round the car is very unstable under brakes and very loose in rear on exit. The car coming around a sweeping straight will kick out in the rear causing me to spin out. through the tighter part of the track the streering pushes abit should i be going for a softer set up all round or harder.

thanks in advance