Rate my car
11-15-2004, 04:47 PM
#16
Originally posted by kh15
what size tires are you running because according to the gear chart you tc3 should be well over 40mph with a 30/700 gear combo and a 64mm tire (thats what i use) and the 34,800rpm the ss5800 produces?
what size tires are you running because according to the gear chart you tc3 should be well over 40mph with a 30/700 gear combo and a 64mm tire (thats what i use) and the 34,800rpm the ss5800 produces?
11-15-2004, 04:50 PM
#17
i think if i use a 70/30 for my motor wont that be overgeared
11-15-2004, 08:25 PM
#18
Tech Regular
ohhh my bad i thought you said 70/30
11-15-2004, 08:45 PM
#19
Tech Adept
Put some locktite on that screw. Its what I did and it hasnt flung out yet since I did.
11-17-2004, 04:31 PM
#20
thanks i did that and it worked!
11-18-2004, 03:54 AM
#21
TC3 almost every aluminium upgrade going
Team Paradigm stock
LRP V7.1
KO-Propo PS2117 ( i think ) cost me 85 quid anyway
Pro-Trak charger
Team Titan TC2 shell
Team TJ cells
Team Paradigm stock
LRP V7.1
KO-Propo PS2117 ( i think ) cost me 85 quid anyway
Pro-Trak charger
Team Titan TC2 shell
Team TJ cells
11-18-2004, 03:20 PM
#22
cool! what upgrades can u get to make your car go faster other than a good motor and changung the gears? im new to rc so i dont know.
11-19-2004, 03:22 AM
#23
Personally i found that the ally steering rack with bearings make a massive handling improvement as the ally doesnt bend like the plastic/graphite ones. The ally f+r hubs and carriers are a good idea as they dont snap or bend cause there so small and strong. The ally wishbones are a very strong but just make sure you run the standard plastic parts to hold the wishbone pins in under the diffs cause if you have a hard hit the ally will not snap so the plastic bits will and they are very easy amd cheap to replace. Also it makes your ride look sweet but its costs alot but is well worth it in the end
11-20-2004, 11:17 AM
#24
11-20-2004, 01:22 PM
#25
Now, that is a good setup paz
11-20-2004, 02:24 PM
#26
Thanks 
lol
lol
11-20-2004, 03:45 PM
#27
Tech Fanatic
tc3novak
you could try ceramic bearings............they will make it faster
11-20-2004, 04:32 PM
#28
ya, but ceramic berings are alot of work and you always have to keep them clean. although they will make the car alot faster. I would just stick with the ones u got unless they are rusted,
hpipro321
hpipro321
11-21-2004, 11:26 AM
#29
Yea i looked into them but there expensive and hard to get in the UK, so im running a fill teflon kit which are soooooo smooth. Just got a few more ally parts today 
if u got a TC3 BUY IRS LIGHTWEIGHT DIFF HALVES THEY KICK ASS
if u got a TC3 BUY IRS LIGHTWEIGHT DIFF HALVES THEY KICK ASS
11-27-2004, 12:25 PM
#30
Here it is, just waiting for the wide blue bumper holder, ally front and rear body posts, probably a BMI Blue ETC3 conversion to
