Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
#1666
Tech Rookie
Truck arrives on Friday
I can't wait my truck arrives on Friday !!!!! pretty good considering I'm in Orangeville Canada
#1669
And I moved on to kids now.
+ YouTube Video | |
Last edited by SaladFork; 03-01-2011 at 08:09 PM. Reason: doh
#1673
Tech Regular
Hacker or Casper
Do you guys know whats going on with LOSB9602 MultiPro Intelligent Balance Charger w/PowerSupply? Horizon cut the price and they are out of stock with no due in date. Is losi coming out with a new charger. I'm getting my SCTE tommorow and I plan getting back into electric racing (from a 5 year nitro run) and i just dont think the NIMH will cut it anymore. I'm getting some 60c 6000 losi lipos and i wanted to just stick with the losi charger but if it is getting discountinued what charger do you recomend.
Do you guys know whats going on with LOSB9602 MultiPro Intelligent Balance Charger w/PowerSupply? Horizon cut the price and they are out of stock with no due in date. Is losi coming out with a new charger. I'm getting my SCTE tommorow and I plan getting back into electric racing (from a 5 year nitro run) and i just dont think the NIMH will cut it anymore. I'm getting some 60c 6000 losi lipos and i wanted to just stick with the losi charger but if it is getting discountinued what charger do you recomend.
#1674
.050", 1/16" and 5/64" hex driver
That should cover just about everything on the truck.
#1675
My scte doesn't arrive until tomorrow but....my spare parts, wheels and tires all arrived. Wheels and tires are all glued up and ready for the truck when it gets here.
BTW: Love the yellow bead lock rings hacker!!!
BTW: Love the yellow bead lock rings hacker!!!
Last edited by jhautz; 03-01-2011 at 09:23 PM.
#1678
Tech Elite
iTrader: (121)
Hey Ryan or Casper,
I tore down the diffs in my NIB TEN-T this evening. I got to the last diff and 2 of the screw heads rounded out.
I drilled the heads off the screws with a carbide drill in my drill press. I was able to remove the rest of the screws by grabbing them with a pair of needle nose vice grips and backing them out.
What size are those screws? They look to be 4-40x3/8 flat head.
Thanks,
Chris
I tore down the diffs in my NIB TEN-T this evening. I got to the last diff and 2 of the screw heads rounded out.
I drilled the heads off the screws with a carbide drill in my drill press. I was able to remove the rest of the screws by grabbing them with a pair of needle nose vice grips and backing them out.
What size are those screws? They look to be 4-40x3/8 flat head.
Thanks,
Chris
#1679