Team Br00d Racing Motors
03-02-2006, 10:52 AM
#2641
Stock and 19t motors are only 1-2 days really.....modified motors is where we are behind. Peter is the only one that really does them, cause the other two guys do all the stocks and 19t.....while sometimes doing a little modified stuff....When we got back from the birds we had a nice stack of modified stuff.....and then got nailed order after order over the next two weeks. We are leaving for carpet nats in about 10 days, so I am gonna be cutting off modified orders tomorrow till after we are back.....stock, 19t, batteries, tools, etc will continue to ship while we are gone.....
Later EddieO
Later EddieO
03-02-2006, 02:23 PM
#2642
Hi Eddie, I ordered some center cut arms before. But I don't know which one for the Ti and which for the Shock because they look the same and I accidentally order them with same wind and same quantity also. Please help
03-02-2006, 02:27 PM
#2643
Tech Adept
eddieO you have a pm
03-02-2006, 02:53 PM
#2644
Tech Regular
hi what are the difference between the
"BLUE Springs" and "BLUE Overhead SPRINGS" ?
or
the
"RED Springs" and "RED OVERHEAD SPRINGS" ?
"BLUE Springs" and "BLUE Overhead SPRINGS" ?
or
the
"RED Springs" and "RED OVERHEAD SPRINGS" ?
03-02-2006, 02:56 PM
#2645
Tech Adept
one pair are for stock are some 19 turns and the overhead ones are for mod motors
03-02-2006, 03:02 PM
#2646
The overhead spring is for the Positive side of most stock and 19t motors, usually epic motors.
Pretty sure its the positive side anyway.... the side where when you look at the brush tube, the spring post is on the left.
All motors used to have both sides of the endbell with the spring posts on the same side. But, they changed it so the springs are not symmetrical, they are opposite.
So, if you want to rebuild a stock motor with new springs, you will need one regular and one "overhead" spring.
Pretty sure its the positive side anyway.... the side where when you look at the brush tube, the spring post is on the left.
All motors used to have both sides of the endbell with the spring posts on the same side. But, they changed it so the springs are not symmetrical, they are opposite.
So, if you want to rebuild a stock motor with new springs, you will need one regular and one "overhead" spring.
03-02-2006, 03:10 PM
#2647
Tech Adept
Originally Posted by EddieO
JanisK......the Pt is what a lot of the AE guys run in 1/12th scale....but the Ti works just as well. Chris Tosolini won 2005 snowbirds with a Ti in his Corally 1/12th Scale.....the Ti Worlds is NOT recommended for 1/12th scale.....you will dump and dump badly.
Later EddieO
Later EddieO
If im looking for efficiency, i should go with two magnet can, right?
03-02-2006, 04:12 PM
#2648
Originally Posted by EddieO
Stock and 19t motors are only 1-2 days really.....modified motors is where we are behind. Peter is the only one that really does them, cause the other two guys do all the stocks and 19t.....while sometimes doing a little modified stuff....When we got back from the birds we had a nice stack of modified stuff.....and then got nailed order after order over the next two weeks. We are leaving for carpet nats in about 10 days, so I am gonna be cutting off modified orders tomorrow till after we are back.....stock, 19t, batteries, tools, etc will continue to ship while we are gone.....
Later EddieO
Later EddieO
what day are you getting in? We'll be at the track on wednesday for the first day of practice.
03-02-2006, 05:18 PM
#2650
Eddie, what's the deal with my motors? I ordered them over two weeks ago. I've tried sending you PMs and emails, but I'm not hearing anything.
I am assuming that nothing has shipped yet, and that you're going to have someone bring the stuff over? Since the C2 is the only 19T legal for regionals, could you change the Atlas to a C2?
Josh
I am assuming that nothing has shipped yet, and that you're going to have someone bring the stuff over? Since the C2 is the only 19T legal for regionals, could you change the Atlas to a C2?
Josh
03-03-2006, 03:46 PM
#2652
Tech Adept
I will attend the LRP TC masters this year.. what would be a good motor/arm/wind combo?
-Hugo
-Hugo
03-03-2006, 04:13 PM
#2653
Josh, I received no emails from you....and my PM box is full, so not sure how you sent me one of those...
We are extremely back logged.....and trying to catch up. The guys are sending some stuff today on your order that we have done....I can't swap the Atlas for a c2, cause we don't have any c2 motors left.....they are all out at trinity.
Later EddieO
We are extremely back logged.....and trying to catch up. The guys are sending some stuff today on your order that we have done....I can't swap the Atlas for a c2, cause we don't have any c2 motors left.....they are all out at trinity.
Later EddieO
03-03-2006, 04:23 PM
#2655
eddieo--just sent email..