If he searches on ebay he will find 2 of em for about $7 shipped. Then plug one into each ballance plug. So each battery will have a buzzer.

ok, i was wondering myself, i have left my 4S lipo plugged in my ofna box for over a month on accident and dint have any problems. charged fine and only took 300mah.

The first two times I used lipo in the box I puffed them. Just got an alarm at overdrive rc and love the set up. Look it up on line. This is now working much better than the parallel sticks.

Welcome Mike!

hi guys

i recently buy a losi 2.0 race roller install a plus 4 and hit the track... ran about a gallon or so on it and notice that the clutch shoes did wear out pretty fast...

i did my homework about aftermarket clutch and will buy the m2c clutch...

does anyone who have this clutch use the stock losi CB?

also seeking advise in the setup of the flywheel weights and the springs

thanks

you cannot run stock CB. i run ascendency 13T CB on mine. you will need the one piece mount so you can make the engine 2mm forward. i use the kingsheads mount.

on setup, i run 4 screws, 4 1.0 (black) springs with reg medium shoes. however, with the losi, im going to 1.05 clutch springs i believe. but first trying some more powerful engines. was running the red head Alpha (F850) but going to orange (S852) or Grey (A852) next outing with it. was running the red with the setup i said in Mugens and it was perfect.

most start with 8 screws in the inside 8 holes, and 4-8 on outer. i like mine to have to have a little snap. just always make sure you have it equal on both sides or it will throw it off balanced. and 4 screws at a time, with 2 you cant really tell much, if any.

hope this helps.

That is going to be my next investment too. Hopefully someone with this setup will chime in.

This clutch needs an ofna style cb any of the major brands will do and the spring setup above seems like a good place to start. I like to start soft and then go up from there if I need more snap.

Thanks a ton Rider.
Yes I am currently running 2x7.4 lipos but I Have a 3s I havent used yet.
Its great that the alarm plugs right into the ballance plug.
I thought I'd hav to hard wire it in soThats a Bonus...
Thanks all for the help..

No problem. I cant take all the credit. Integra was the fella who got me pointed onto these.

Cool I just ordered 4x of them Ill keep two and give two away Im sure a few guys at the track would apreciate a little gift..

See ya in a couple 3-4 weeks buddy.

You can use Losi bell with this one.

http://www.m2cracing.com/product.sc?...&categoryId=44

it wouldnt work for me.....

I switched the rear tower to a V2 was wondering if i should upgrade the front tower any suggestions? thanks guys