2991Likes1/12 forum
09-21-2011 | 02:08 PM
09-21-2011 | 02:16 PM
XRay XII Active Brace
Does anyone know if the XRay XII active front brace can be adapted to other reactive caster front ends like the older CRC or AE versions?
http://www.teamxray.com/teamxray/pro...=3415&catName= - Front Alu Active Brace - Set
http://www.teamxray.com/teamxray/pro...=3415&catName= - Front Alu Active Brace - Set
09-21-2011 | 02:46 PM
Tech Fanatic
iTrader: (13)
Joined: Feb 2005
Posts: 933
From: Mobile, AL
http://www.lefthander-rc.com/catalog...oducts_id=1929
And here - (to match the horrible red on a CRC)
http://www.lefthander-rc.com/catalog...oducts_id=1930
Also available in black, but Lefthander is out of stock.
With those blocks you can mount up the R5 on any car that has spacing/holes to mount the original dynamic strut front end. (CRC, AE L-series, BMI, Speedmerchant, etc..)
09-21-2011 | 03:00 PM
Here -
http://www.lefthander-rc.com/catalog...oducts_id=1929
And here - (to match the horrible red on a CRC)
http://www.lefthander-rc.com/catalog...oducts_id=1930
Also available in black, but Lefthander is out of stock.
With those blocks you can mount up the R5 on any car that has spacing/holes to mount the original dynamic strut front end. (CRC, AE L-series, BMI, Speedmerchant, etc..)
http://www.lefthander-rc.com/catalog...oducts_id=1929
And here - (to match the horrible red on a CRC)
http://www.lefthander-rc.com/catalog...oducts_id=1930
Also available in black, but Lefthander is out of stock.
With those blocks you can mount up the R5 on any car that has spacing/holes to mount the original dynamic strut front end. (CRC, AE L-series, BMI, Speedmerchant, etc..)
09-21-2011 | 03:02 PM
Tech Fanatic
iTrader: (13)
Joined: Feb 2005
Posts: 933
From: Mobile, AL
The Xray one looks like it would work, though. I know the holes are there in the old caster blocks as well as the R5 blocks.
09-21-2011 | 03:18 PM
Tech Master
Joined: Jun 2003
Posts: 1,556
From: AZ
E
09-21-2011 | 06:11 PM
Does anyone know if this Speedzone 1S saddle pack will be available any time in the future ?
Thanks - sorry for bring up old posts
09-21-2011 | 06:46 PM
http://www.rctech.net/forum/9649619-post259.html
09-21-2011 | 06:46 PM
Check HERE
No current plans on bringing back the 1S saddle lipo. Demand was huge when we released the packs. Now with practically every 1/12 using straight packs, we are focusing our efforts on producing the best 1S straight packs AND 2S pack.
__________________
Speedzone Cells & Brushless Motors - It's all About Performance!
Speedzone R/C - Radio Control Car Products and Accessories
2011 Canadian Onroad National Champions
www.speedzoneUSA.com
__________________
Speedzone Cells & Brushless Motors - It's all About Performance!
Speedzone R/C - Radio Control Car Products and Accessories
2011 Canadian Onroad National Champions
www.speedzoneUSA.com
09-21-2011 | 06:52 PM
Damn
Thanks Chris Moore & RedBullFixx. I guess the only way to run LiPos now in my 12L4 would be by drilling the chassis (for the battery tape) and running a 1S pack on one side of the chassis, with the electrics on the other side ?
Thanks Chris Moore & RedBullFixx. I guess the only way to run LiPos now in my 12L4 would be by drilling the chassis (for the battery tape) and running a 1S pack on one side of the chassis, with the electrics on the other side ?
Last edited by Losiho; 09-21-2011 at 06:53 PM. Reason: typo
09-21-2011 | 07:04 PM
I believe those have been discontinued
Check HERE
Check HERE
09-21-2011 | 09:32 PM
Well, just ordered my CRC Gen-XL, I also bought the second motor mount and the full-boxed pod top plate so its like a Gen-XL+ or something. Hoping to go faster with it, maybe donate my old Carpet Knife to a deserving kid or something.
