iCharger and power supply
#1
I want to charge 25C 4000mAh Lipo batteries at a 5C rate.
That means I need a charger capable of 20 amp charge current.
This charger can do that...
http://www.hobbyking.com/hobbyking/s...dProduct=10382
Also, it needs a power supply that is rated above 360 Watts...
BUT, if I only plan to charge the battery mentioned above(one at a time), I will only use around 170 Watts. In other words, the charger wont be demanding more than 170 Watts. Therefore, I wont need a high watt power supply if my charger isnt demanding that much watts.
So do i need a power supply that is rated at 210 Watts? or 360 Watts?
This PS is rated at 350 Watts. Could i squeeze by with it?
http://www.progressiverc.com/index.p...emart&Itemid=1
Thanks for your input!
That means I need a charger capable of 20 amp charge current.
This charger can do that...
http://www.hobbyking.com/hobbyking/s...dProduct=10382
Also, it needs a power supply that is rated above 360 Watts...
BUT, if I only plan to charge the battery mentioned above(one at a time), I will only use around 170 Watts. In other words, the charger wont be demanding more than 170 Watts. Therefore, I wont need a high watt power supply if my charger isnt demanding that much watts.
So do i need a power supply that is rated at 210 Watts? or 360 Watts?
This PS is rated at 350 Watts. Could i squeeze by with it?
http://www.progressiverc.com/index.p...emart&Itemid=1
Thanks for your input!
#3
Tech Champion

Joined: Oct 2007
Posts: 7,341
Agree, that power supply is a good match for the charger, has a good rep too.
To elaborate you are correct in thinking you could get by with about 210W for now, but with the 350W you are set for whatever you might do in the future with the charger. The slightly higher voltage compared to a typical supply is a good match for that charger too if I'm not mistaken.
To elaborate you are correct in thinking you could get by with about 210W for now, but with the 350W you are set for whatever you might do in the future with the charger. The slightly higher voltage compared to a typical supply is a good match for that charger too if I'm not mistaken.
#5
#6
Tech Master
iTrader: (3)
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Did anyone ask for a spam link ?
http://www.himodel.com/search.php?psearch=icharger
http://www.himodel.com/search.php?psearch=23a
www.hobbyking.com
www.epbuddy.com
www.progressiverc.com
Cheers
http://www.himodel.com/search.php?psearch=icharger
http://www.himodel.com/search.php?psearch=23a
www.hobbyking.com
www.epbuddy.com
www.progressiverc.com
Cheers
Last edited by crusey_aus; 02-19-2011 at 01:24 AM.
#7
Tech Initiate
iTrader: (1)
Joined: May 2010
Posts: 32
Not sure where you are located, but same price after shipping from here in the US:
http://epbuddy.com/index.php?main_pa...&products_id=3
http://www.amainhobbies.com/product_...er-6S-20A-300W
http://epbuddy.com/index.php?main_pa...&products_id=3
http://www.amainhobbies.com/product_...er-6S-20A-300W
#9
Joined: Jul 2008
Posts: 11,530
From: Houston, TX
If you buy your iCharger from HK, just be aware that any probs will be expensive since you have to pay to return it (and wait) and get any probs resolved. Not knowing where you're located makes this less than clear cut.
My 3010b iCharger and Powerlog were bought from Progressive RC and I know he provides top notch after the sales service for anything he sells.
My 3010b iCharger and Powerlog were bought from Progressive RC and I know he provides top notch after the sales service for anything he sells.
#11
Joined: Jul 2008
Posts: 11,530
From: Houston, TX
I wouldn't buy one from HobbyKing in Hong Kong, either buy from Progressive RC, EPBuddy or get the same thing from AMain (the re-badged Protek chargers) and eliminate any probs with returns. With S&H, it'll be cheaper to get one from an iCharger delaler in the US.
I've read some nightmare stories on returning iChargers thru HK.
I've read some nightmare stories on returning iChargers thru HK.
#12
Tech Master
iTrader: (2)
Joined: Jan 2009
Posts: 1,780
I wouldn't buy one from HobbyKing in Hong Kong, either buy from Progressive RC, EPBuddy or get the same thing from AMain (the re-badged Protek chargers) and eliminate any probs with returns. With S&H, it'll be cheaper to get one from an iCharger delaler in the US.
I've read some nightmare stories on returning iChargers thru HK.
I've read some nightmare stories on returning iChargers thru HK.


