yea i think you guys are right. the t-maxx is a 10lb. 4wd. big wheel truck. i will put the 2075 servo im getting on the throttle/brake. i'll keep the 2070 on steering for now, but i will upgrade it to either that savox or a hitec. which servo would be the best choice for my steering basically? something like in the $40-$50 range.

http://cgi.ebay.com/Savox-SC-1256TG-...item43a345c913

A little more than you want to spend, but well worth it

wow that is a little expensive. but i believe its worth it buy reading the specs! i mean 277 oz-in!

The same servo with similar specs in other makes is $30-40 bucks more.

hey ck i am not sure where i read it but check into your radio system being able to use a digital servo. i thought i read it here on rc tech forums that the stock style am radios should only use analog servos. example a stock tmaxx that comes with the 2018 or 2055 servoes are analog type and they dont recommend going digital unless you are upgrading the radio & reciever to a newer digital style too. maybe someone else could chime in if i am making sense or am totally offbase here. if you have a newer tmaxx with the traxxas 2.4 ghz it may not matter. does anyone know if this is true

yea right now im using the tq3. but the t-maxx came with the 2070 digital steering servo. im going to the traxxas link 2.4ghz soon anyways.

yea true. do i really need 277in-oz torque? is there a servo like in the middle. whats the hitec servo a lot of people reccomend?

got a new tx/rx 2.4 traxxas system id sell for $55.......... come pick it up

i like the hitec mg645 all i have used for years in my savage

i would tomorrow if i had the loot! i should be getting my income tax soon. if you still got it then, i'll get it from you.

yea, i think thats the one i see people saying. plus i found this servo for $40-

http://cgi.ebay.com/Savox-SC-0251MG-...item4aa8320aa3

alright lmk I could also sell you those bottles of ARO and a rx hump pack for another 10..... also got some glow wrenches and ignitors also if your interested



here is that servo

http://cgi.ebay.com/Hitec-HS-645MG-H...item53e1ca6cfe

ok, get back to me in a couple weeks on that incase i forget. im definatley interested! yea i just looked on ebay to at those. only $30 and they sound like a great servo! the torque isn't a lot more than the traxxas one. but i like the metal gears!

how about this one? lol 600+ iz-oz torque!!

http://cgi.ebay.com/Hitec-7980-Mega-...item53e18770c8

compared to the savox after looking at the torque I would go with that over a hitec..... ten bucks more for more torque is a good deal.... both metal and both with 2 ball bearing