Hi does anyone know where I could get a centre clutch bolt (holds the clutch on to the crank) from for my Novarossi MR 12 thanks.

Also could anyone advise me where to buy parts such as pison from cheers - James

Check your local Hobby store. It's just a 3mm SHCS(socket head cap screw)


Pass you soon...

You are taking about the engine nut, that hold the clutch spring nut?

what car? I don't know if all cars use different clutch nut thickness?

Let's start there or like lil-bump said local hobby shop if your close to one....

Billy

Cheers but my local hobby store doesn't stock the parts. It Is a Nova MR 12 for a Mugen MTX4/R .12 1/10 IC. It is the Allen head bolt that holds the clutch bell on to the crank via the centre of the shoes. For the parts I was wondering if there would be a good online store ?

Cheers - James

You have to find another LHS because that is a simple M3x12 of M3x16 screw.

actually i think it has some sort of special spacing on it. Like a counter sink that caries on a short approx 6 mm spacing shaft type thing. But if it is removable then yes it is just a normal bolt.

cheers

Also does anyone know where to get A. the bearings for the clutch and B. main bearings (for the crank) and does anyone know the size of the inner bearing (the one closest to the con rod) cheers - James

By the way (if it helps) I think the main bearing closest to the clutch is 607Z what ever that is. Could the inner one be the same or different, by the looks it is slightly bigger.