is there any mod bodies??? im tired of the stock...and the only one ive seen is a proline body i think and it was super ugly..

Jconcepts...and proline makes another 1 called the SPRINT...i think....

Bodies that I know of are: Stock losi, Proline BullDog, Proline Shift, JC Punisher. I think that's all of them. The losi one is the best IMO. Strongest and best looking.

i think the bulldog is the best looking but losi is by far the strongest body

hey guys im new to lost jus wanted to ask if you guys are drilling your pistons in your truggy if so what size bit thanks for the help.

This is a personal preference type of thing. Some people love it...some don't even notice. LOL. When you buy spare parts order some extra pistons, they're cheap, so you can go back if you don't like the drilled ones. My guess is you'll be just fine with drilled pistons. Here's the drills from Racers Edge http://www.racers-edge.com/NO_54_59_..._p/rce7060.htm

Hi everyone,
I've got an 8T1.0 and after 3 gallons my throttle servo horn developed quite big slop on the holes where the linkages are attached. Do you use any replacement such as hudy alu horn or just buy the whole throttle/linkage set every now and then?

The Hudy maybe is not the best example because Losi uses bigger holes in throttle servo horn than standard. Do you know any better quality horns which will fit my truck?

vp-pro-usa.com
they have alluminum 1's

Thanks!

And is it ok to use alu horn on the throttle servo in Losi? I mean, Losi eats throttle servos.

they only eat servos when not set up correctly...trust me i have gone through alot of GREAT servos...and finally learned the technique...no more throttle servo issues

Hudy horn and dynamite linkage. Take the stock loops out and it's good.

Ok I will try these VP-PRO out. Are the holes the same size as in the Losi horn?

EDIT: I didn't notice your answer before i submited my post Frank. Now i have a brand new throttle/brake Losi linkage at home so i won't buy a Dynamite one + Hudy horn. Maybe in the future. Nevertheless, thanks for help.

i am pretty sure!...but let me verify that for you first!

You talking about these horns? Do they fit the losi with no drillings for the linkages?

http://www.vp-pro-usa.com/rc-parts-a...category_id=22

Nope they dont..gotta drill the holes bigger