from running a b4 to an x6sq i felt a big change is rear grip. I went from a car that was tricky to get on the gas hard to one that you could almost abuse the trigger with...

Steering Rack:

We chose the steering rack configuration for two reasons:
1) True ackerman can be achieved and steering geometry is much more consistent throughout the steering throw. The end result is a very neutral steering feedback around center and increased steering as the throw increases. In other words you do not have a super twitchy car around center just to make it turn.

2) Packaging. The was secondary, but the rack system is very simple and takes up less room. having the servo mounted further forward gave us the EXACT weight distribution we were after. The result? better steering center out.

We tested the rack system on all types of tracks for months and have never had it lock up. it also has been tested in Europe (does it rain there?) and have had zero issues. There are self cleaning grooves in the rack to wipe away dust/debris. We have put alot of development time into this rack system

Frank, the car looks dialed, great job to all you guys at Team Losi, cant wait to get mine, already pre ordered it! Cant wait to hear how it does at the Spektrum race, good luck with the testing!

OOOOOOOOOOH. I just got an RB5, but may grab one of these too to try it out. I'm really digging the Durangoish design. Narrow with low CG. Gosh, so tempting.

I wouldn't call it a non issue as we don't know yet how it will work on this car. Yes the CW rack works very well. My only issue with it is that it does tend to get a bit sloppy. But then there was the rack on the TC3. The tiniest of rocks would lock that thing up.

That being said, I'm sure Losi has it figured out. If I had someplace to race offroad around here, I would pick one of these up in a heartbeat.

Shocks don't need a bleed screw, they are a bladder shock, and have a bleed hole for making buildng easier.

What is the best ETA date we can hope for? Also what determines an release date and what delays these dates?

When can I buy it?

BAD TO THE BONE !!!!!

Not nit picking, just saying that there are racks that work and there are racks that DON'T work. I'm sure Losi will have one that does work. They had better anyway. If it's as easy to lock up as a TC3 rack, they are going to lose a lot of races due to rack issues.

But like i said, if I had a place to race it, I would trust that they got it right and have one on pre-order. Car looks great.

1st of 2011 quarter means between January 1 and March 31. We've learned from past product releases that it's sometimes painful to get your heart set on a day only to have it pass by. I'm just going to race my XXXcr through this indoor season. If it comes out in late Feburary, it might as well come out in August for those of us that mostly race 1/10 indoors/winter so we get the benefit of seeing the model shake out and shops stocking up their replacement parts for the 1st few months.

Great job TL, this looks like winner. Looks like it's nearly as simple as the XXX platform, which was always one of my favorite things about it.

Losi says Feb., but I'm sure something will happen to set that date back.

Anyways from reading all the comments, it looks like this may change the world of 1/10 2wd buggy as we know it. Should be very cool.

this buggy looks great, I may have to go back to losi, I just got back into racing and i'm running kyosho's, I used to run losi's back in the day, dam this kit looks serious.