Lrp Runner
#1
Tech Apprentice
Thread Starter
Lrp Runner
Can a LRP Runner Plus reverse take modified motors?
#3
Tech Apprentice
Thread Starter
i looked on the team associated website and they said it was able to hold a 17 turn stock
#5
Tech Apprentice
Thread Starter
but can the runner support modified motors and if so how mant turns
#6
If Associated said the lowest you can run with that ESC is a 17 turn motor, that IS a modified motor and 17 turns is as low as you can go without damaging the ESC. ANY motor with less than 27 turns is concidered "modified". Hope this helps.
#8
Originally posted by Cain
You may want an ESC that has brakes on it. From what I understand the runner doesn't.
You may want an ESC that has brakes on it. From what I understand the runner doesn't.
#9
Tech Apprentice
Thread Starter
actualy it does have brakes
#11
Tech Apprentice
Thread Starter
No. you cannot take off the reverse and i think its already preset
#13
Tech Apprentice
Thread Starter
ITS ALREADY SET
#14
Lancer, it depends on how much that ESC can handle. If it has a motor limit of 15T, u can use up to 15T modified motors. Anything over that, it can't handle. If u use an LRP IPC 7.1 which has no motor limit, u can use any motor out there today.
Mini NAte
Mini NAte
#15
Tech Apprentice
Thread Starter
Thanks