Go-Tech Engines Thread
What kind of vehicle are you using it in, I have seen before on certain cars that the clunk come off of the line in the tank.
Joined: Dec 2009
Posts: 7,916
From: northern michigan
i had the same problem with mine, it was the HSN setting was to lean, it also has to do with the half tank bog after a long straight, just richen the HSN and you should be all set!! it may run alittle rich for the first lap or 2 but will get much better as fuel goes down.
i had the same problem with mine, it was the HSN setting was to lean, it also has to do with the half tank bog after a long straight, just richen the HSN and you should be all set!! it may run alittle rich for the first lap or 2 but will get much better as fuel goes down.
Thanks guys.
Joined: Dec 2009
Posts: 7,916
From: northern michigan
yep, same thing! then you have to lock the breaks to get the front end to come back down...lol, that should do the trick for ya!!
just remember, very fine adjustments of the HSN as it won't take much to go to far !
I ran Buggy on the weekend just for shits and giggles
with my trusty old 7 port.
Man I forgot how much I lauph at myself when driving buggy compared to Truggy.
I get it out to sharppen my reflexes on accasions and the 7 port is still going strong after being in hibernation since the last time I got out the buggy.
forgive the spelling if its wrong
with my trusty old 7 port.Man I forgot how much I lauph at myself when driving buggy compared to Truggy.
I get it out to sharppen my reflexes on accasions and the 7 port is still going strong after being in hibernation since the last time I got out the buggy.
forgive the spelling if its wrong

Well.... I just sold my YFZ 450 today. I got enough to pay it off, pay next months rent, and I'll have about 250 left. I have a 2013, 086 and my RTR pipe. I want to get an engine and bump box but I know I'll need a pipe was just hoping I could put it off for what I got for a couple weeks so I could get the box.... The AE comes with a POS drill start. I know 250 isn't quite enough but was hoping I could get close to that number and give the Go's a try. My other option is to get a motor that runs with the 2013 or 086.... know what I'm sayin....
Well.... I just sold my YFZ 450 today. I got enough to pay it off, pay next months rent, and I'll have about 250 left. I have a 2013, 086 and my RTR pipe. I want to get an engine and bump box but I know I'll need a pipe was just hoping I could put it off for what I got for a couple weeks so I could get the box.... The AE comes with a POS drill start. I know 250 isn't quite enough but was hoping I could get close to that number and give the Go's a try. My other option is to get a motor that runs with the 2013 or 086.... know what I'm sayin....




2Likes
that's not to bad for a rusty old nail 