Tony's Screws
http://www.tonysscrews.com/product.s...&categoryId=53
Tony is a great guy. He probably will just send you what you need but for $5 you get the whole kit.

anyone tried the odonnell 97t with this engine does anyone recommend this plug?
cheers

That is all I have ever used since I bought my Plus-4. They work great and they are cheap!

do u guys use 25% or 30% for this engine

25% sponsored drivers I see run 30% they can afford too!
thats what I thought I tried one on the weekend and it ran great thanks

need help with replacement part
what is the different between P4 piston 06000 vs 06002
actually want to buy 8502-10 instead of the old 8502
is it interchangeable?

I just picked upa mbx6 with this motor in it but I will need a pipe and header. I run on mostly medium to large tracks with alot of jumps and they are usually alittle loomy. Also this is my first novarossi so is there anything that I should be carefull of or need to know. Thanks.

Hi.

Anyone tried a 3016 (Jamin/Hong Nor) pipe on a 2009 Plus 4? Good or bad

http://www.houstonsengineservice.com...dd5354d5fd1747

this one

9901ss/41005 better mileage or 9886/41021 more top

Will those headers work with the MBX6 buggy? I noticed that they sell 2 Mugen specific headers.

Im running the 4C-team and are really glad I bought this engine! Its a killer

But yesterday I bumped into problems, my engine was just stalling on top... I was at the euros an ran 30% byrons and here at home I run 25%. Haven't touched the head shims. Tried another engine, and it worked good (no prob's with the tank or fuel lines or clutch).

I kept on turning the HSN out, but without sucsess....



Have anybody else had this problem or any hints that can help me?

JoeC, the header you want is the 41029 standard length for the mbx6. The 41030 is longer for more bottom end and less top. Ive got both, but always run the 41029 with the 9901ss pipe.

The 41021 won't fit on the MBX6?