Community
Wiki Posts
Search
Like Tree2Likes

Go-Tech Engines Thread

Thread Tools
 
Search this Thread
 
Old 07-16-2010 | 07:07 AM
  #11116  
Stalkie's Avatar
Tech Adept
iTrader: (2)
 
Joined: May 2010
Posts: 110
From: NSW, Australia
Default

I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes, its our clubs first ever club day
Magpie and Higgo will be up for the day so we will see how she GOes....

Bring on Sunday
Stalkie is offline  
Old 07-16-2010 | 07:45 AM
  #11117  
max_chen's Avatar
Tech Regular
 
Joined: Jul 2007
Posts: 338
From: Taiwan
Default

Originally Posted by Stalkie
I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes, its our clubs first ever club day
Magpie and Higgo will be up for the day so we will see how she GOes....

Bring on Sunday
You can't disappointed to setup APlus 0801(reinforce stinger) on MG66.
max_chen is offline  
Old 07-16-2010 | 07:46 AM
  #11118  
Tech Adept
iTrader: (1)
 
Joined: Aug 2009
Posts: 126
From: taguig
Default

i hope you make a GO ENGINE basic tuning video like this novarossi video
http://vimeo.com/7595905
jeremiah23 is offline  
Old 07-16-2010 | 10:46 AM
  #11119  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Originally Posted by BiggB0SS
I suck and I have a 7port. Witch pipe will smooth out the powerban?
The HN 2027, is a smoooooth pipe.
Flanno is offline  
Old 07-16-2010 | 01:28 PM
  #11120  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Originally Posted by Stalkie
I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes, its our clubs first ever club day
Magpie and Higgo will be up for the day so we will see how she GOes....

Bring on Sunday
Let me know what ya think of the 0801.

The 2072 out performed it on the dyno, but I want to see how it performs on the track.

The 2072 is good on fuel and helps the 66 rev hard without loosing bottom end.
I suspect the 0801 will increase bottom but want to know if limits top end and any changes in run times OK Stalkie.
Flanno is offline  
Old 07-16-2010 | 05:19 PM
  #11121  
22Racer's Avatar
Tech Elite
iTrader: (67)
 
Joined: Mar 2002
Posts: 3,150
From: Wanamingo Mn
Default

Originally Posted by max_chen
You can't disappointed to setup APlus 0801(reinforce stinger) on MG66.
I just got 4 of the new 0801 pipes in today, can't wait to try one! Also got the 2081, how does the 2081 perform? I hear it's more low end?

Rex
22Racer is offline  
Old 07-16-2010 | 11:10 PM
  #11122  
max_chen's Avatar
Tech Regular
 
Joined: Jul 2007
Posts: 338
From: Taiwan
Default

Originally Posted by 22Racer
I just got 4 of the new 0801 pipes in today, can't wait to try one! Also got the 2081, how does the 2081 perform? I hear it's more low end?

Rex
You should never can't disappointed for both pipes.
Sure.
max_chen is offline  
Old 07-17-2010 | 02:57 AM
  #11123  
Stalkie's Avatar
Tech Adept
iTrader: (2)
 
Joined: May 2010
Posts: 110
From: NSW, Australia
Default

Originally Posted by Flanno
Let me know what ya think of the 0801.

The 2072 out performed it on the dyno, but I want to see how it performs on the track.

The 2072 is good on fuel and helps the 66 rev hard without loosing bottom end.
I suspect the 0801 will increase bottom but want to know if limits top end and any changes in run times OK Stalkie.
OK mate...I will put Magpie to work on the stopwatch and see how much punch the 0801 puts through the MG.

WOOHOO first club race day only 13 hrs to go.....
Stalkie is offline  
Old 07-17-2010 | 03:06 AM
  #11124  
MAGPIE-121's Avatar
Tech Fanatic
iTrader: (10)
 
Joined: Nov 2009
Posts: 859
From: Budgewoi NSW
Default

Originally Posted by Stalkie
OK mate...I will put Magpie to work on the stopwatch and see how much punch the 0801 puts through the MG.

WOOHOO first club race day only 13 hrs to go.....
flanno, i won't pit for it, just the stopwatch lol
MAGPIE-121 is offline  
Old 07-17-2010 | 04:48 AM
  #11125  
Stalkie's Avatar
Tech Adept
iTrader: (2)
 
Joined: May 2010
Posts: 110
From: NSW, Australia
Default

What are you saying Magpie you wouldnt pit for me LOL

Thats OK , I've got the wife for that But I prob wont get to run truggy tomorrow if we only have one group as I have to pit for her


The 0801 pipe gives the GX5 port a bit of crack, Tracy has it in her truggy and it pulls little wheelies more often than mine that has the 2072(same trug&engine)
Stalkie is offline  
Old 07-17-2010 | 05:06 AM
  #11126  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Magie

Thanks Stalkie.

Good luck tomorow guys.
Flanno is offline  
Old 07-17-2010 | 05:15 AM
  #11127  
MAGPIE-121's Avatar
Tech Fanatic
iTrader: (10)
 
Joined: Nov 2009
Posts: 859
From: Budgewoi NSW
Default

Originally Posted by Stalkie
:
But I prob wont get to run truggy tomorrow if we only have one group as I have to pit for her
run both as there's plenty of us to pit for the cheese & kisses
catch ya in the morning
MAGPIE-121 is offline  
Old 07-18-2010 | 03:40 AM
  #11128  
808gx7r's Avatar
Tech Addict
 
Joined: Jun 2010
Posts: 721
Default

i have a gx7r pipe combo... just recently its played up. HSN is flush. idle is 0.7mm. now heres the problem... i can keep turning in my LSN and its just so rich still... so i leaned even more and more... heaps of smoke... mybe 20kmph tops... with a pile of smoke...

i've checked everything... mybe a glow plug issue? its looks fine but mybe?
808gx7r is offline  
Old 07-18-2010 | 08:59 AM
  #11129  
Tech Adept
 
Joined: May 2010
Posts: 106
From: Bloemfontein, South Africa
Default

Can someone with some tuning experience/expertise of the GX 7R summarize some essential tuning tips of this engine for us, please? I have not read the entire 740 pages of this thread...
lomdel is offline  
Old 07-18-2010 | 01:18 PM
  #11130  
sriley's Avatar
Tech Regular
iTrader: (32)
 
Joined: May 2009
Posts: 426
Default

Originally Posted by lomdel
Can someone with some tuning experience/expertise of the GX 7R summarize some essential tuning tips of this engine for us, please? I have not read the entire 740 pages of this thread...
Go here http://www.go-racing.co.nz/ and click om tech tips.
sriley is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.