4LikesScale RC
06-24-2010 | 09:43 PM
#842
Wow. Congrats on those.
06-24-2010 | 11:08 PM
#844
Joined: Mar 2002
Posts: 2,834
From: Singapore
Salamat!
Eh kasi, walang maduming lugar dito. at di nakaka tuwa na lahat semetado.
Nong pinost ko ang mga pictures ng indoor course diyan, eh may "kups" na taga dito na nagtatanong kung pwede daw sia makipagsabayan sa inyo.
Sabi ko, eh pwede, kaya lang 3-4 oras na lipad
Anyway, excited na talaga ako sa susunod na project mo
, este 
pala. Malufet ba din, ang pagkaka-tira, bro?!
06-24-2010 | 11:50 PM
#845
yes sir, mga ganyan nga sir siggy, yung full body, or truggy style, basta may cab parin na pwede paint. yung mga scorpions kasi or tuber ba, eh medyo nawiweirdohan pa ako sa itsura, pero it will grow out in me rin siguro eventually lalo na siguro pag nakakita na ko ng maraming tuber in one event... open parin naman ako sa lahat ng clase ng auto.
sir may mga ibang pix paba kayo nung tundra na truggy? idol na idol ko rin yun eh.
sir may mga ibang pix paba kayo nung tundra na truggy? idol na idol ko rin yun eh.
06-25-2010 | 02:14 AM
#846
Joined: Mar 2002
Posts: 2,834
From: Singapore
Some basic guidelines for a scale rig - jz an idea.
1. Wheelbase must fit vehicle body and must fit in your fender wells
2. Use scale tires - e.g Flatiron, roxlox, rc4wd tires? - (comments guys?)
3. No four wheel steering - jz front steering, No dig.
4. You must have a complete body - cutting can be allowed but it should maintain the overall shape of vehicle.
5. Single Engine rigs only
6. Vehicle must use frame railed chassis
7. Maximum wheel rim size - 1.9"?
8: Maximum Tire size - ?
Track width: 11-12inches? (MSD dimensions)
We can also have Spec class for Hilift and CC01 - All Stock (separate category sila) - what do you think guys?
I posted these so that we can have a baseline reference for our next meeting.
-Miker
Based on this proposal/practice, Are Scale Tubers allowed to compete? THANKS!
06-25-2010 | 05:49 AM
#847
Excited nako! July 4 na ba Madda?
Next time ako naman ang kukuha ng vid para makalaro kayo
Gusto ko narin magbawas ng timbang! Hirap lang magtangal ng accessories na pinaghirapan gawin. I hope i can buy another kit, kahit RTR na honcho
gagawin ko ng magaan this time - wala ng pampabigat!
Next time ako naman ang kukuha ng vid para makalaro kayo
Gusto ko narin magbawas ng timbang!
Hirap lang magtangal ng accessories na pinaghirapan gawin. I hope i can buy another kit, kahit RTR na honcho gagawin ko ng magaan this time - wala ng pampabigat! 
msdelr: Hi, is this the CO2 gas tank you were talking about at Factory48?
By the way, I made a video of your trail run. Hope you like it.
http://www.youtube.com/watch?v=DWjOlEvnydY
06-25-2010 | 08:52 PM
#848
Tech Apprentice
Joined: Jun 2008
Posts: 91
From: QC
Siggy: We still do not have rules except for the rim size limitation. Enjoy muna tayo Dami ng rigs mo ah! sana madala mo dito yan... sayang naman kung di mapuputikan
Keno: Wow thanks for the video! Nice shot! ill be getting a Flip cam this PM. Next time ako naman kukuha Yung tank kailangan pa i scale pa ng konti (perhaps lagyan ng paint or hose etc.)but i think that will do. I want to simulate a cylinder tank. (Calling Sir Edwin? - Help!)
Dami ng rigs mo ah! sana madala mo dito yan... sayang naman kung di mapuputikanKeno: Wow thanks for the video! Nice shot!
ill be getting a Flip cam this PM. Next time ako naman kukuha Yung tank kailangan pa i scale pa ng konti (perhaps lagyan ng paint or hose etc.)but i think that will do. I want to simulate a cylinder tank. (Calling Sir Edwin? - Help!)
06-25-2010 | 09:06 PM
#849
Joined: Mar 2002
Posts: 2,834
From: Singapore
Siggy: We still do not have rules except for the rim size limitation. Enjoy muna tayo Dami ng rigs mo ah! sana madala mo dito yan... sayang naman kung di mapuputikan
Keno: Wow thanks for the video! Nice shot! ill be getting a Flip cam this PM. Next time ako naman kukuha Yung tank kailangan pa i scale pa ng konti (perhaps lagyan ng paint or hose etc.)but i think that will do. I want to simulate a cylinder tank. (Calling Sir Edwin? - Help!)
Dami ng rigs mo ah! sana madala mo dito yan... sayang naman kung di mapuputikanKeno: Wow thanks for the video! Nice shot!
ill be getting a Flip cam this PM. Next time ako naman kukuha Yung tank kailangan pa i scale pa ng konti (perhaps lagyan ng paint or hose etc.)but i think that will do. I want to simulate a cylinder tank. (Calling Sir Edwin? - Help!)These sold in a few days -- just glad to have grabbed a few.
06-25-2010 | 09:22 PM
#850
Tech Initiate
Joined: May 2010
Posts: 32
Sabi ko na nga ba, eh. Ganito pala ang, "cups of tea", mo?! AYOS!
Salamat!
Eh kasi, walang maduming lugar dito. at di nakaka tuwa na lahat semetado.
Nong pinost ko ang mga pictures ng indoor course diyan, eh may "kups" na taga dito na nagtatanong kung pwede daw sia makipagsabayan sa inyo.
Sabi ko, eh pwede, kaya lang 3-4 oras na lipad
Anyway, excited na talaga ako sa susunod na project mo, este pala. Malufet ba din, ang pagkaka-tira, bro?!
Salamat!
Eh kasi, walang maduming lugar dito. at di nakaka tuwa na lahat semetado.
Nong pinost ko ang mga pictures ng indoor course diyan, eh may "kups" na taga dito na nagtatanong kung pwede daw sia makipagsabayan sa inyo.
Sabi ko, eh pwede, kaya lang 3-4 oras na lipad
Anyway, excited na talaga ako sa susunod na project mo
, este pala. Malufet ba din, ang pagkaka-tira, bro?!
06-25-2010 | 10:01 PM
#851
For what purpose ba Fire extinguisher?
Eto meron sa Toy Kingdom baka pwede medyo mabigat ng konti kasi Diecast P800
meron di ako diy na extinguisher using bathroom deodorizer.
eto yun link sa build pics madali lang yan yakang yaka nyo yan
http://www.rccrawler.com/forum/showt...e+extinguisher
Eto meron sa Toy Kingdom baka pwede medyo mabigat ng konti kasi Diecast P800
meron di ako diy na extinguisher using bathroom deodorizer.
eto yun link sa build pics madali lang yan yakang yaka nyo yan
http://www.rccrawler.com/forum/showt...e+extinguisher
06-26-2010 | 12:44 AM
#852
2.2 Crazy Crawler Class Series result of June 20 competition (Father's Day Comp)
1st Gino
2nd Lester
3rd Ryan
4th JR
the rest of the participant double DNF. (super hard core)
CR-01 Class
Champion Ken Ken
1.9 Scale Class
Champion Keno
2.2 Crazy Crawler Series after 2nd Leg
Gino 16pts
JR 14pts
Ryan 14pts
Brian 11pts
Lester 10 pts
Noel 6pts
Kelly 4pts
Poch 4pts
Albert 1 pt
Monty 1pt
Jess 1 pt
Peter 1pt
1st Gino
2nd Lester
3rd Ryan
4th JR
the rest of the participant double DNF. (super hard core)
CR-01 Class
Champion Ken Ken
1.9 Scale Class
Champion Keno
2.2 Crazy Crawler Series after 2nd Leg
Gino 16pts
JR 14pts
Ryan 14pts
Brian 11pts
Lester 10 pts
Noel 6pts
Kelly 4pts
Poch 4pts
Albert 1 pt
Monty 1pt
Jess 1 pt
Peter 1pt
06-26-2010 | 01:04 AM
#853
race result of June 20 comp
posted the race result sa Crawler Corner...baka kasi may magalit dito sa thread ng Scalers.
http://www.rctech.net/forum/manila-r...orner-162.html
http://www.rctech.net/forum/manila-r...orner-162.html
06-26-2010 | 01:59 AM
#854
Tech Initiate
Joined: May 2010
Posts: 32
06-26-2010 | 02:04 AM
#855
Joined: Mar 2002
Posts: 2,834
From: Singapore