Here's a little inspiration.

Lol! Baka naman nag re-stock na pati other branch o baka pati iba stores meron na.

FYI RC4WD seats are bigger than cellphone seats it bigger like RC4WD use Cellphone seat as a mold

Maddafunker: Nagpunta ko ng trinoma i saw a tundra set and f350 problem is wala silang parts dun wala silang link etc...abutin ng 30k kit palang and the remote na 4 channel....ano masuggest mo sakin na iba pang sources?

Yung 4 channel radio, kailangan mo lang yun kung lalagyan mo ng sound and light unit yung kit. Kung hindi, any radio and receiver pwede.
Yung 4 link suspension, hop up yun para sa tundra and/or F350. On-line ka bibili nun kasi wala yata ginawa ang Tamiya na 4-link para sa Tundra/F350.
Yung 30K para sa kit, punta ka ng Megamall. Mas may discounting sila dun most of the time.
Pasensya na at ako na ang sumagot.

mga sir,ano po ba ok sa SCALE CRAWLER? 4 link or leaf spring??

balak ko kasi gawin scale crawler ang MRC ko.

tia

micoh2010: Tama si Bossing JP dun. Kung medyo mabigat sa budget mo, pwede kang mag-CC01 muna using your existing radio. Yung kit nun less than 8k lang. For light trailing, pwedeng-pwede na yun. Or maghanap ka ng Axial SCX10 na RTR. Less than 15k ang magagastos mo, aandar na.

aramacir: Mas may articulation ang 4-link pero mas scale-looking ang leaf. Yung MRC multi-link diba? Kung may mahahanap ka na ladder frame chassis, shorter shocks and scale body, tapos adjust mo upper and lower links, pwede na syang pang-scale crawling.

thanks sir madda,ito po plan ko.

1/18 to 1/10
Suzuki Samurai body
Ladder chassi(fabricate)
shocks(from my mini LST)
4 link(from axial)for lower
stock lower link ng MRC for UPPER
motor move in front like this http://rc4wdstore.com/2/product_info...5b5ef3cbd961b9
gear reduction

here my MRC today
tube chassis made by me.

Carmate seats are about 1/8 scale used to be popular because they were the only ones available for many years. They are a good fit for tubers like my Sniper and Wreckluse, and your Timberwolf. These tubers were built from scratch with these seats in mind.

+ YouTube Video

Maybe slightly big for a Tamiya Hilux Truggy interior, but they sure can be retro-fitted, nicely.

Can also get the Mastercraft replica seats by Reign which is very popular in the 1:1. Or maybe racing seats with the very scale 5-point seat belt by team3six.

There was a guy based in Malaysia that used to sell nice reproductions of the carmates for $5 at Scale4x4, with the back already covered

Oh yeah, the Carmate Seats are hard to find. Get em while you can especially if you prefer the Recaro Design. They go for about $30 for a pair with custom buckles/seat belts by Scale Designs.

Hindi ba magiging makitid yung MRC axles for the Ladder chassis/Samurai Body? Anyway can always use wheel wideners.

BTW! Great job on the tube chassis!

Just finished painting and applying the decals on the Defender body of JPRacing's Gelande.

Tomorrow I'll apply the clear coat then black out the fender flairs.

Ayan na! Go Bonididit!

JPRacing: Abot sa Sunday yan!

hi mga bossing, tanong lang ako kung mga magkano ang price ng cc01? planning to buy one..

Tamiya #58445 1:10 CC-01 Toyota Land Cruiser 40 W/ ESC + LED Light Unit -7,395 on stock @champion Hobbies 3766006 09232802214 look for ela & just give the PArt n0. #58445

WoW!!!

Excellent shot.