astig ang massacre!!! ganda vids boss madda!!!
guys: finally, i finished my homework over the weekend

my mods: axial scx10 dingo kit

replaced knuckle arms, dogbone, lifted differential, parts from crazy crawler,
tnx sir bryan & sir lester! dami ko natutunan senyo!


proline racing dodge ram body from pitshop:
tamiya hilift magwheels, flat iron pl tires from scx10 kit


finished!!!



parang ke hirap dumihan!

the GANG:

axial scx10 dodgeram, tamiya hilift hilux, losi midnight crawler hummer, tto1 tamiya civic hatchback eg6

boss madda: astig ang timber wolf mo ah! naunahan mo ko dun sa kinuhanan?hehehe

bos jp: see you at f48 sir!

boss age69/boss min101: ganda! same tayo ng hardbody, from radioshack ung akin mga tol, medyo match sa sxc10 tsaka sa hilift chassis. body post extension lang ang kailangan.

Boss min101: paorder nga po ng lpg and other scale items 09228706410/09175965818

thanks sir edwin! see you sa 20th.

mga bowsings: kita kits on june 20!

PEACE

Guys,

Anybody tired or know an alternative to remove anodized plating? I searched for Easy Off as suggested on RCC but its not available either at Ace or Handy man, any suggestion? Want to remove the green anodized on my axial bead-lock.

TY.

check mo ito sir.
http://www.philippinercdrifters.org/...dpost&p=167008

Oo nga ano ginagamit ngapala yun sa panglinis ng (alu) evaporator ng aircon. Thanks I'll try that.

liquid zosa sir. bale yung part na you'll be de-annodizing, lublob nyo sa container with distilled water. then add the liquid zosa drop by drop until the part starts to bubble. pag may bubbles na, stop adding liquid zosa. leave for 10-15mins. after 10-15mins, remove the part (make sure you're wearing gloves) and rinse under running water. then wipe the part clean. kung meron pang annodizing, dip nyo ulit sa solution for another 5-10mins.
its important not to leave the part in the solution or else you'll end up with a pitted piece of aluminum. hths.

fEn,

scale lpg came from a key chain i had a long time ago.
cooler came from an old container for pellets (air gun).
basket came from my niece's doll house.
cars are from my collection.

check out this scale build thread using the fj body

http://www.scale4x4rc.org/forums/showthread.php?t=13924

min101 - Pre, baka may spare CC 01 tires and rim ka dyan buy ko na lang para makumpleto CC 01 Pajero project ko.

Yes sir I hope I can meet up with you guys on the 20th, still waiting for things to clear up

fEn: Thanks chief! Your SCX10 is looking good. Love the bike on the roof! Mukhang ready na for Sunday ah.

Here's an update on my T-Wolf ...

Bare bones.



HPI Rubicon body ready for cutting.



Body fitting and electronics installed.



Masking.



Painted hood.



Next is to work on the panels and some waterslide decals. Whew!

thanks for the reply sir, was actually thinking of the other LC80. yung bulldog po. i tried inquiring narin po kay crazy crawlers pero pati daw po sya naghahanap din nun. gandang ganda lang talaga ako dun and matagal ko ng gustong gawin yung nakita ko dati sa japan4x4mag. anyway, will stay tune baka one of this days, may maligaw na ganung shell. ang gaganda ng mga scalers nyo po dito. sana makuha ko na yung magiging scaler ko if ever para mashare ko rin dito, for now watch and learn lang muna ako sa inyo.

Dax, saw this 1:1 over the weekend and remembered the scale crawlers here Looks like a Tamiya Toyota Prerunner!

HI MARK, ITO VERSION NG TOYOTA PRERUNNER SA SHORT COURSE

Thanks chief! RC4WD Timberwolf and Junfac Lizard yung mga kit. Kabalbalan na talaga! Chong sama ka na sa Sunday, miss ka na ni msdelr.

age69: No prob.

Mark: Lupit! Ganda rin ng kit version! Ako naman nakakita ng lifted 1973 Bronco na nakamalaking Mickey Thompson sa Shell C5. Babae pa ang may dala.

I was once interested with this body but a bit expensive for my taste.
http://tziworld.com/shop/index.php?m...products_id=32
Its actually made in Japan by Active-hobby.com

and an RCC LC80 build
http://www.rccrawler.com/forum/showt...=206795&page=2