Scale RC
#586

Sir JP: kumusta yun shock/coil spring mo sa gelande okay ba? Balak ko kasi kumuha 80mm na shock eh. Ang tigas kasi nung internal spring ng shock ko tsaka di scale tingan parang floating lang tuloy un chassis unless mag leaf spring ako.
#587
Hi! Just got this today! 

By the way, just look at my LRP ESC. ( did not waterproof it during last Sunday trail)


I had to cut the case to clean the ESC!
It lost forward function when it rolled over after the rain.
After cleaning, it's functional again.
I also discovered that the front propeller joint lost an e-clip and the pin fell out. Maybe it hit a sharp
stone or rock during the trail. Fortunately the pin was still at the floor in my car.
fEn : please check your hilux also, maybe we can put a small amount of glue to prevent the e-clip
from getting loose.
Sama ako diyan sir!
Thank you sir, It's really different when you're trailing in a natural environment. The feeling and trill is
different. The rain made it more exciting! ( my ESC was not waterproof but still I ran it when it rained!
)
Please join us sir, you will be surprise at what your rig can do there.
Video:


By the way, just look at my LRP ESC. ( did not waterproof it during last Sunday trail)


I had to cut the case to clean the ESC!
It lost forward function when it rolled over after the rain. After cleaning, it's functional again.

I also discovered that the front propeller joint lost an e-clip and the pin fell out. Maybe it hit a sharp
stone or rock during the trail. Fortunately the pin was still at the floor in my car.

fEn : please check your hilux also, maybe we can put a small amount of glue to prevent the e-clip
from getting loose.

Thank you sir, It's really different when you're trailing in a natural environment. The feeling and trill is
different. The rain made it more exciting! ( my ESC was not waterproof but still I ran it when it rained!
)Please join us sir, you will be surprise at what your rig can do there.

Video:
Last edited by keno4864; 06-11-2010 at 05:50 AM.
#588
madda/miles/keno/noel/miker: MGA BOWSINGS,
got my scx10 last thursday, YAHOO!!!
madda: any scale body brand you could suggest fit for the scx10?, parehas tau sir ng kit same with keno's new kit, wala ako makita mabilhan, last try today punta ko pitshop.
crazycrawler/f48: sirs! request kami ng maputik at tubig,
ready na kits ng mga 4x4scaleheads.
to all: see you at f48 guys!
PEACE
got my scx10 last thursday, YAHOO!!! madda: any scale body brand you could suggest fit for the scx10?, parehas tau sir ng kit same with keno's new kit, wala ako makita mabilhan, last try today punta ko pitshop.
crazycrawler/f48: sirs! request kami ng maputik at tubig,
ready na kits ng mga 4x4scaleheads.to all: see you at f48 guys!
PEACE
#590
guys
Im letting go of my RC4WD T-Finder body. It comes with stickers, window mask. Has a small dent probably from shipping.
Note: Wheelbase is 11" so is a bit short for SCx10 by 1/2inch but it could still fit perfectly if you will cut the front bumper and retain your stock bumper or by shortening the wheelbase
1,500.00 only for you guys
Meet up at SM bacoor, Alabang festival mall or shell (bacoor) gas station just right of coastal end or ship at buyer expense.


09173286889
1st come 1st serve lang ha.
Im letting go of my RC4WD T-Finder body. It comes with stickers, window mask. Has a small dent probably from shipping.
Note: Wheelbase is 11" so is a bit short for SCx10 by 1/2inch but it could still fit perfectly if you will cut the front bumper and retain your stock bumper or by shortening the wheelbase

1,500.00 only for you guys

Meet up at SM bacoor, Alabang festival mall or shell (bacoor) gas station just right of coastal end or ship at buyer expense.
09173286889
1st come 1st serve lang ha.
#592
keno & fEn: Congrats on your new babies! Sakto yan for the 20th.
Set-up na!
fEn: You can use your Hilux body for that, truggy look. Yung front cab lang ang kinakabit tapos tuber works sa bed part, parang Honcho. Or any Proline Monster truck body, just watch out for the wheelbase para hindi masagwa tignan. Trim na lang if needed. Edwin's T-finder body looks good too!
Ako naman ...


Set-up na!fEn: You can use your Hilux body for that, truggy look. Yung front cab lang ang kinakabit tapos tuber works sa bed part, parang Honcho. Or any Proline Monster truck body, just watch out for the wheelbase para hindi masagwa tignan. Trim na lang if needed. Edwin's T-finder body looks good too!

Ako naman ...



#593
madda/miles/keno/noel/miker: MGA BOWSINGS,
got my scx10 last thursday, YAHOO!!!
madda: any scale body brand you could suggest fit for the scx10?, parehas tau sir ng kit same with keno's new kit, wala ako makita mabilhan, last try today punta ko pitshop.
crazycrawler/f48: sirs! request kami ng maputik at tubig,
ready na kits ng mga 4x4scaleheads.
to all: see you at f48 guys!
PEACE
got my scx10 last thursday, YAHOO!!! madda: any scale body brand you could suggest fit for the scx10?, parehas tau sir ng kit same with keno's new kit, wala ako makita mabilhan, last try today punta ko pitshop.
crazycrawler/f48: sirs! request kami ng maputik at tubig,
ready na kits ng mga 4x4scaleheads.to all: see you at f48 guys!
PEACE
#598
Joined: Mar 2002
Posts: 2,834
From: Singapore
#600
edwin: Thanks chief. That's the T-Wolf from RC4WD, the other one's the Lizard from Junfac. Yup, the Lizard uses the tranny and axles of the CR-01.
Thanks to Crazy Crawler for feeding my addiction. 
Crazy Crawler:
siggy: Excellent vid! Very zen ang dating, especially with the music and the location. Lupit ng Rock Bug mo chief!
Dongskie: Ayos! Pasyalan ko.
GUYS: Eto na utang ko sa inyo. Ngayon lang ako nakahinga from work. Enjoy!
Thanks to Crazy Crawler for feeding my addiction. 
Crazy Crawler:

siggy: Excellent vid! Very zen ang dating, especially with the music and the location. Lupit ng Rock Bug mo chief!

Dongskie: Ayos! Pasyalan ko.
GUYS: Eto na utang ko sa inyo. Ngayon lang ako nakahinga from work. Enjoy!
| + YouTube Video | |



4Likes
Game na tayo! 