4LikesScale RC
06-10-2010 | 02:14 AM
#572
thank you & welcome sir!sama ka na sa june 20
06-10-2010 | 03:23 AM
#573
Father's Day Crawling event
Father's Day Crawling event
2.2 and CR-01 Class Competition
Scale Crawlers competition (new class)
rules will be discuss for this class...
JUNE 20, 2010, 1 PM Sunday
AT:
FACTORY48
#48 Howmart Rd.
Balintawak, Quezon City
(1 km west of SM North Edsa, just past Congressional. Turn right on Howmart Road-small eskinita under Kaingin Footbridge. The compound is directly across from yellow LTFRB gate)
http://maps.google.com/maps?f=q&hl=e...2C+Philippines
2.2 and CR-01 Class Competition
Scale Crawlers competition (new class)
rules will be discuss for this class...
JUNE 20, 2010, 1 PM Sunday
AT:
FACTORY48
#48 Howmart Rd.
Balintawak, Quezon City
(1 km west of SM North Edsa, just past Congressional. Turn right on Howmart Road-small eskinita under Kaingin Footbridge. The compound is directly across from yellow LTFRB gate)
http://maps.google.com/maps?f=q&hl=e...2C+Philippines
06-10-2010 | 06:34 AM
#575
Wag na ninyo hugasan kit ninyo. Dudumihan lang ulit natin yan. Do you guys want mud pits for the scale track? We're setting up the track this weekend.
I suggest you guys ask Miker about waterproofing your electronics.
I suggest you guys ask Miker about waterproofing your electronics.
06-10-2010 | 06:36 PM
#577
My H3 on front solid axle swap project begins
http://www.rccrawler.com/forum/showthread.php?t=254208
http://www.rccrawler.com/forum/showthread.php?t=254208
06-10-2010 | 06:46 PM
#578
06-10-2010 | 07:14 PM
#579
edwin: Grabe! Dami mong oras! 
Looking forward to another excellent build.
etivac13: http://www.rccrawler.com/forum/showthread.php?t=26785
Looking forward to another excellent build. etivac13: http://www.rccrawler.com/forum/showthread.php?t=26785
06-10-2010 | 08:31 PM
#581
Guys,
Besides the scale track we're building, Factory48 and Crazy Crawler will be setting up a Scale Truck Show in the near future. This will be held on a future competition day. Pagandahan na ito ng Scale Trucks. The more Scale accessories and ingenious ideas, the better.
How long do you guys need to work on your trucks for this? A couple of months? Research na kayo!
Jess
Besides the scale track we're building, Factory48 and Crazy Crawler will be setting up a Scale Truck Show in the near future. This will be held on a future competition day. Pagandahan na ito ng Scale Trucks. The more Scale accessories and ingenious ideas, the better.
How long do you guys need to work on your trucks for this? A couple of months? Research na kayo!
Jess
06-10-2010 | 09:20 PM
#583
06-10-2010 | 09:59 PM
#584
POGI
06-11-2010 | 01:57 AM
#585
Tech Apprentice
Joined: Jun 2008
Posts: 91
From: QC
To waterproof ur rig? - jz read the one posted by Madda
ok na guide na yon.
I sealed my tekin esc with liberal amounts of silicone sealant.
Same with my Hitec servo, i placed silicon sealant on the screw holes and on its midsection where the two halves meet. I also use car grease to seal the hole where the gear goes out then i packed the inside of the servo with grease - now i havent done this with my new servo.
I also used the sealant to secure my SCX10's radio box to secure my receiver.
I filled my axles with car grease to prevent it from corroding inside and giving it a lower cg.
My deans plug i taped it also. I wrapped my maxamp batteries (eventhough they say its already waterproof) with tape and sealed gaps with sealant.
When placing sealant, put it in layers so that in case where there are still gaps then the 2nd and 3rd layer will make sure that no liquid will enter your electricals. This is especially true for wirings that protrude out of the radio box, servo, esc's.
-Miker
ok na guide na yon.I sealed my tekin esc with liberal amounts of silicone sealant.
Same with my Hitec servo, i placed silicon sealant on the screw holes and on its midsection where the two halves meet. I also use car grease to seal the hole where the gear goes out then i packed the inside of the servo with grease - now i havent done this with my new servo.
I also used the sealant to secure my SCX10's radio box to secure my receiver.
I filled my axles with car grease to prevent it from corroding inside and giving it a lower cg.
My deans plug i taped it also. I wrapped my maxamp batteries (eventhough they say its already waterproof) with tape and sealed gaps with sealant.
When placing sealant, put it in layers so that in case where there are still gaps then the 2nd and 3rd layer will make sure that no liquid will enter your electricals. This is especially true for wirings that protrude out of the radio box, servo, esc's.
-Miker