fEn: Hard body ba yang FJ40 mo? Ganda!

sir miles: Interesting yang esc mo ah, waterproof. Kaya ba ng Viper ang 3S lipo? May balak ako.

keno: Ganda rin nyan, mukha lang mabigat.

kennethM: Kanino napunta yang truck na yan?

msdelr: Ang sama ng panahon sa Montana Scale Nats, lahat sila basa. Masyado ngang matagal yung 6 months, let's cook something up for July. I foresee another wave of scalers joining us soon.

JON0529: Ganyan talaga. Once you try it, you'll get hooked! Walang sumbungan sa Dangerous Drug Board ha.

OK sir, see you guys there at 7:00 am!

Thank you sir, I am still thinking of using a polycarbonate body to lower the weight and will try it soon. . .

Hindi pa muna sir, medyo hard lang kasi sa trigger. Excited kasi!

I still have these motors to experiment with.

msdelr/mike: Naku, salamat sir! Tuwa naman ako at natuwa rin kayo sa aking munting CC01...hahahaI'll post pix of the mods that I did to my CC01 as soon as I can. And thanks for the nice pix.

Madda: Ganda ng video! I have to say that my favorite part is the last! Aruuuuuyyy!

Keno: Thanks sir, CC01's are a good entry level rig, tapos mod na lang ng mod hanggat sa kakayanin. Dami rin kasi pwede gawin sa chassis na ito. Yours and Fens highlifts were also great and really fun to see.

Fen: Pag may oras, gawa ako ng scale stuff, let you guys know pag meron na. Mejo madami dami pa itong ibang "smaller scale" projects na kelangan tapusin, hehehe.

SirMiles: Thanks for the tip, ika nga ni Keno, mejo excited pa kaya mabilis pa ang reverse. Pag nagka budget, ill get an mtronics. Para ma-sauli ko na rin itong mga tupperware ko sa kusina!hahaha!

And lastly.....BUHUHUHUHUHU! DI AKO MAKA SAMA SA SUNDAY!

Sa susunod na kabanata na ako ulit!

Thanks again guys, have fun on Sunday!

mix237 : please watch this Pajero CC01 suspension modifications!

http://www.youtube.com/watch?v=MSCsjPpyXFU
http://www.youtube.com/watch?v=RabXn3B7xhM
http://www.youtube.com/watch?v=GEkBNQeSwtc
http://www.youtube.com/watch?v=XUYFFrHTCAc

Madda - hindi kaya ng Viper ko ang 3s lipo. 4.8V tp 9.6V lang ang kaya nya.
Pero kung makakakuha ka ng Viper Marine esc yun up to 12V kaya nya.

I love this video!

http://www.youtube.com/watch?v=0GTK3...eature=related

sir miles: balak ko umiskor ng itinutulak mo (esc viper) para d ako mabitin, kelan kaya pwede? swak b sa budget? sana nakasalpak na sa unit ko yan b4 sunday. /ayusin ko din mounting ng body ng fj40v para ok. /nice vid ng cc01 jeep, dami karga, rc na may rc pa sa bubong, anu kaya laman nung bag?

sir madda: thanks sir, it's hard body, pinag iisipan ko kung ilalagay ko, mabigat kc eh lalu na pag nilagay interior. baka lalo ako laging sumesemplang nxt trail pag yun ang gamit ko

sir noel: we'll miss you! hapdey lang naman sir, baka makapasyal ka?/ wait ko
scale accessories ah? tenks!

anybody: baka po gusto nyo ng winch cable yung metal, 25mm diameter on full scale, swak sa rc winch scale na din tignan, kulay silver, flexible po 1meter long stranded 7strands, singkapal ng patay na buhok per strand pang give-away pag nagkita kits on sunday, may stock papo ako dito 3x1meter each.

see you all on sunday!!!

p.s. pasensya napo kayu lahat, adik tong kalaro nyo, di mapakali sa rc.

sir keno: mas astig sayo! ganda body. sa sunday po hilux dala ko, partner ulit tayo. kukuha ko ng inaalok ni sir miles, uncontrollable kc talaga ung akin. have a nice day!

Galing naman ng mga sasakyan at palaruan!!! Ayos, siguro sa Pasko baka maka-luwas.

Fen: San ka nakabili ng FJ na hard body? Mas malaki ba yan sa tamiya na FJ lexan body?

Kenneth: Pre yan din hardbody din ba? ano wheel base?
Me niluluto lang kasi ako bago project

http://www.integy.com/st_prod.html?p...23&p_catid=114

Sayang. Yung Marine may drag brake?

fEn: Lagay mo yung interior, sayang eh. Pero wag mo gamitin yang body pag Angono ang takbo, medyo mabigat nga. Ok yan for pure trailing lang.

siggy: Hintayin ka namin sa Pasko. Dala ka ng rigs mo.

VooDooPH: Nice seeing you here chief. That BL combo is nice but I still strongly suggest going brushed for these rigs. No BL motor can beat the torque of a brushed motor. So when are you trailing with us?

from old rc toy 'to sir edwin, padala lang from abroad nuun pang 2002, sayang ang body kungdi gagamitin, medyo mabigat, semi hard-flexi plastic made by radioshack. di ko pa nasukat (in terms of lenght) ung wheel base pero match sya sa hilift. peace.

gud evening mga sir, gusto ko lang sana humingi ng opinion, gusto ko sana kumuha ng rc crawler ko, pero tight budget. itatanong ko lang sana kung ano ang sa tingin niyo ay ok na entry level crawler. im considering tamiya cc01, sino po ba gumagamit ng ganito? wat about availability ng parts at upgrade parts. sana matulungan niyo ako.thanks

fmark: Welcome and thanks for having interest in this side of the hobby. If you want to go purely crawling, almost all of the big brands have them. There's the Axial AX10, the new Axial XR10, Losi's Comp Crawler and Night Crawler, Kyosho's Rock Force, HPI's Crawler King, Venom's Creeper and rigs available through online shops. If you want to go scale, the Axial SCX10 is the most capable, commercially-available kit. Tamiya has the CR01, High Lift and the CC01. The yellow FJ40 on the recent video is actually a CC01. It's very capable as long as you modify it's suspension and steering geometry. Parts are available locally and the kit's price won't hurt your wallet. Hope this helps and hope to trail with you soon.