what brand ceramic bearings fit the SS such as TKO?

thanks guys

any 14x25x6 bearings

i looked them up and there are 25.4s and 25.8s
would the 25.4 work then?

thanks again

no they will not work.... the 25,4's are for rb ws7 motors... the 25.8 are for the rb c-6 motors... only use a 14mm x 25mm x 6mm bearing will work... use this link http://www.avidrc.com/product/8/metr...-bearings.html

jeremy

thanks jeremy
but are there any ceramics in this size available?

Try Boca and ACER

that link is for the ceramic bearing... browse there site.. click on the bearings tab on top of the page.. click the metric word on the left side of the page... scroll thru all the different bearings... they have most sizes in both standard and ceramic... later.. off to my ball game... jeremy

thanks for all the help guys
avid has ceramic front bearings that ill most likely try
however they do not have a ceramic version of the 14 x 25 x 6 yet.
Jeremy i appreciate the help and the link but after reading the description it is a steel bearing plus the pic gives it away as their ceramic balls are a darker color.
thanks again guys
lmk if u happen to find a ceramic rear bearing

no one will make this bearing as a ceramic as size 25mm is known as the rtr bearing for engines not racing engines .

well i guess a front ceramic will have to do

its the same front bearing as a Vspec and i know they make those ceramic

sorry try this link... http://www.bocabearings.com/main1.as...n=*ENK-161C-MX

here is the other link for both ceramic and regular.. http://www.bocabearings.com/main1.as...e&pg=2&mfr=821

boca bearing set for the ss .21 both are ceramic look to be 60 bucks for the pair... jeremy

Dont use the TKO rear ceramic bearing....they run a tad under size....The Boca ceramic is the same size as the OEM bearing. On my calipers they measure (OEM and the Boca) 24.98mm the TKO is 24.81 which almost slides in with your thumb. TKO ceramic front is good to go tho

I'm so psyched i gotta get these on order! but i still got to go buy the engine lol
should i install the ceramics b4 i break it in as there would be extra lube for the new bearings b/c it would be so rich?

I love this motor... I thought they were great beforehand, but my youngest is at about 1.5 gallons, and my oldest is at about 2 and holy crap... powerrrrrrrrrrrr

Just thought I'd share my joy at finally finding a motor i liked