57LikesThe Speed Passion Thread
03-14-2010 | 04:54 PM
#3211
Tech Fanatic
iTrader: (22)
Joined: Oct 2003
Posts: 814
From: downunder
I run windows vista home premium too and had the same issues, after doing everything as instructed.
To get this to work all I did was to right click the speed passion application icon in C:\program files\speed passion v1.32 and go to compatibility tab and select run in compatibility mode for win xp and also check the box to run as administrator. All the new softwares are then available to view in the speed passion installer
HIH
Paul
To get this to work all I did was to right click the speed passion application icon in C:\program files\speed passion v1.32 and go to compatibility tab and select run in compatibility mode for win xp and also check the box to run as administrator. All the new softwares are then available to view in the speed passion installer
HIH
Paul
This is what got it to work in the end, run as administrator. I didn't have to run for win xp though.
03-14-2010 | 05:17 PM
#3212
Tech Fanatic
Joined: Apr 2006
Posts: 893
kriiiss, 2.1GT Prostock Limit is 9.5T for 2S, because it carry Stock Software
but if you are using Mod Software, it equal to no limit ex: 2.5T for 2S
Like Shawn say it is the Pro ones, not the Lpf.
http://www.speedpassion.net/en/productDetails.asp?p=104
but if you are using Mod Software, it equal to no limit ex: 2.5T for 2S
Like Shawn say it is the Pro ones, not the Lpf.
http://www.speedpassion.net/en/productDetails.asp?p=104
03-14-2010 | 08:40 PM
#3213
Tech Initiate
iTrader: (3)
Joined: Jan 2010
Posts: 41
From: Brisbane, Australia
Hi
Just got my lcd program box, i can change all the settings on the esc fine but as soon as i go to upgrade firmware or connect it to the computer it says connecting PC and just stays on that screen.
What am i doing wrong?
Marcus
Just got my lcd program box, i can change all the settings on the esc fine but as soon as i go to upgrade firmware or connect it to the computer it says connecting PC and just stays on that screen.
What am i doing wrong?
Marcus
03-14-2010 | 09:41 PM
#3215
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
03-15-2010 | 12:27 AM
#3217
03-15-2010 | 12:35 AM
#3218
Tech Addict
Joined: Jul 2007
Posts: 737
From: Europe
I have set the drag brakes on 20% but i don't get the same drag brake force ammount when i leave the throtle off.More drag brake when i leave the throtle when the supercharger has engaged and almost no drag brake when i leave it earlier
03-15-2010 | 01:12 AM
#3219
That's really weird, I had massive drag brakes when it was originally set to 10%, just wanted to try it out but didn't like it so set it back to 0% and the massive drag brakes went away.
03-15-2010 | 02:33 AM
#3222
Tech Initiate
iTrader: (3)
Joined: Jan 2010
Posts: 41
From: Brisbane, Australia
nothing, when you open the speedpassion file, in the window that opens, click devices, then you will see, esc, lcd and motor checker ? click on lcd, then you can upgrade or change to then different softwares.
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
Marcus
03-15-2010 | 04:52 AM
#3225
Tech Elite
Joined: Aug 2005
Posts: 2,812
From: Durban, South Africa
i updated to the newer firmware for the lcd. didnt try it with the older version.
Was supposed to run at tehregionals but had some errands i had to do in the morning so pitched up late to run race control. Havent run yet but hope to this weekend.
Was supposed to run at tehregionals but had some errands i had to do in the morning so pitched up late to run race control. Havent run yet but hope to this weekend.