Hi guys,

I´m starting off after 10 years of quitting on road rc. I´ll be racing in the 3 port limited class and was wondering what´s the best engine option out there, all I could find were off road engines so far. Any help will be greatly appretiated.

N21-3T and replace the crankshaft for the one from a faster engine.

Otherwise, if you can get a hand on an old (broken) engine you can get the N21-3T P/S set

thanks for reply.

Are you saying the N21-3T P/S set will fit any novarossi 3 port engine? if so that looks like a good option for starters.

Being there, done that:

http://www.modelbouwforum.nl/forums/...mega-evo5.html

Not just any three port, pretty much any Nova motor. You could drop one in and old RB C3-C6 for that matter.

[QUOTE=Roelof;6960525]Being there, done that:


that looks really good! which pipe would you recommend for a 3 port modified engine?

Basicly almost all .21 P/S sets of all Nova (based) engines will fit. There are some small details as the location pin to hold the sleeve and the thickness of the upper edge on the sleeve.

As pipe the 2052 is running great