RB Concept Engine Thread
#391
Anyone know which manufacturer makes the new Killer 9 engine?
http://www.redrc.net/2009/07/rb-killer-9-buggy-engine/
Looking at the bore/stroke it is no NR model. Also 16.20 x 17.00 does make 3.504cc which is not alowed. But 16.20 x 16.90 is the same as the Sirio CL7B engine which is possible because the Xenon series were also made by Sirio.
http://www.redrc.net/2009/07/rb-killer-9-buggy-engine/
Looking at the bore/stroke it is no NR model. Also 16.20 x 17.00 does make 3.504cc which is not alowed. But 16.20 x 16.90 is the same as the Sirio CL7B engine which is possible because the Xenon series were also made by Sirio.
#392
Dremelboy I hope you can answer this one!
What is the differece between the .12 Matrix R and Matrix RW I just got the RW version 010112-001000 I looked on the site but they look the same to me.
Ok this question is for anyone with an opinion!
I have a brand new RB Concept V12 5 port RODY engine. I'm not sure if I want to use it!
I heard they are very hard to find! besides its not race legal, should I keep it as a colection item so I can show it to my grandkids lol
OR just I just go ahead and brake it in and see what it can do?
Any sugestion is welcome! Thanks in advance!!!
What is the differece between the .12 Matrix R and Matrix RW I just got the RW version 010112-001000 I looked on the site but they look the same to me.
Ok this question is for anyone with an opinion!
I have a brand new RB Concept V12 5 port RODY engine. I'm not sure if I want to use it!
I heard they are very hard to find! besides its not race legal, should I keep it as a colection item so I can show it to my grandkids lol
OR just I just go ahead and brake it in and see what it can do?Any sugestion is welcome! Thanks in advance!!!
#394
Tech Initiate
iTrader: (2)
Joined: Aug 2009
Posts: 27
Hi everyone.
I have an Inferno MP7.5 which is only used as a BMX track basher. The current Nova .21 motors life span is up. Im looking to fit either the RT9 or WS7.
Which motor out of the two would be more powerful?
Secondly I need clarification. The RT9 on the official site gives item #01909-000222.
Ive seen some RB truggy engines with item #RBC01900-000222.
What are the differences with these two motors?
Any advice would be appreciated.
Thanks
I have an Inferno MP7.5 which is only used as a BMX track basher. The current Nova .21 motors life span is up. Im looking to fit either the RT9 or WS7.
Which motor out of the two would be more powerful?
Secondly I need clarification. The RT9 on the official site gives item #01909-000222.
Ive seen some RB truggy engines with item #RBC01900-000222.
What are the differences with these two motors?
Any advice would be appreciated.
Thanks
#395
#397
Got my new RB T9 and so far have put 6 tanks through it for break-in. Will be racing this weekend at our local short track with the Novarossi 2630 pipe. Any suggestions on other pipes which will work on this engine for large tracks?
Regards,
Speyederjedi
Regards,
Speyederjedi
#399
Tech Rookie
Joined: Jun 2008
Posts: 5
thx alot
#400
Alright time for the new power plant for the 733, running it on a short track, some tight turns, like all of us, of course I want the biggest baddest .12 out there I was leaning towards the T 9 on road competition, what do you guys think, good to go, or to much for a tight track. Any other suggestions.
#402



6Likes
I will start braking it in and see what it can do, that's what it's for right?