8T 2.0
08-03-2009 | 06:33 PM
#3991
As documented in the thread. The front wheels rub the A arm. I switched to the AKA rims however I still have rub.
My question is will the 2mm hub extenders cure this?
Also has anyone ever put there truggy on a Hudy system. If so did you notice with the 1's pointed out in the rear toe plate. Did you notice you were actually at 5 degrees toe and not 3. I put in the .5's in pointed out and I was still just shy of 4 degrees.
My question is will the 2mm hub extenders cure this?
Also has anyone ever put there truggy on a Hudy system. If so did you notice with the 1's pointed out in the rear toe plate. Did you notice you were actually at 5 degrees toe and not 3. I put in the .5's in pointed out and I was still just shy of 4 degrees.
08-03-2009 | 07:36 PM
#3993
2nd hole in....the extra hole in on the inside inside and is used in conjunction with the shorter links
As documented in the thread. The front wheels rub the A arm. I switched to the AKA rims however I still have rub.
My question is will the 2mm hub extenders cure this?
Also has anyone ever put there truggy on a Hudy system. If so did you notice with the 1's pointed out in the rear toe plate. Did you notice you were actually at 5 degrees toe and not 3. I put in the .5's in pointed out and I was still just shy of 4 degrees.
My question is will the 2mm hub extenders cure this?
Also has anyone ever put there truggy on a Hudy system. If so did you notice with the 1's pointed out in the rear toe plate. Did you notice you were actually at 5 degrees toe and not 3. I put in the .5's in pointed out and I was still just shy of 4 degrees.
the stock sheet is Wrong for the rear's....here's the proper #'s
Rear Toe-In adjustment
Position....Insert #....total toe-IN....REAL total
Inside........1.............1............1.65
Inside........0.5..........1.5.........2.15
Middle........0.............2............2.70
Outside......0.5..........2.5..........3.25
Outside......1.............3.............3.80
Rear Anti adjustment
Position....Insert #....total Anti....REAL total
UP..........1...............3............3.15
UP.........0.5.............2.5..........2.60
Middle......0.............2.............2.05
Down.......0.5.........1.5...........1.50
Down.......1.............1.............0.95
this may seem like a dumb question but i just want to make sure. is this starter box just for the 1.0 truggys ore does it also work fot the 8ight 2.0t
http://www.horizonhobby.com/Products...odID=LOSA99061
thanks in advance
http://www.horizonhobby.com/Products...odID=LOSA99061
thanks in advance
08-03-2009 | 09:47 PM
#3994
08-03-2009 | 10:27 PM
#3995
I know this is a bit off topic but I ran my 8T 2.0 yesterday for a few hours on the track and it was covered with dirt/nitro...filthy! I tried the S100 spray foam cleaner and have to say...IT WORKS GREAT!!! I didn't need to scrub anything...just spray the foam on and let it sit for a few seconds and then rinse it off (Removed the radio tray first..of course!). Hit is with air compressor to remove the water and I was done....less than 10mins total clean time. No residue or staining, plus no fumes like other nitro cleaners. This stuff is great!!! It comes in a large can that should last you a long time. You should be able to find it at any Harley dealer or motorcycle shop. I'll be buying more soon!
http://www.s100.com/s100_tcc.htm
http://www.s100.com/s100_tcc.htm
08-04-2009 | 05:07 AM
#3996
Tech Regular
Joined: Jul 2009
Posts: 357
From: Appleton Wisconsin
this may seem like a dumb question but i just want to make sure. is this starter box just for the 1.0 truggys ore does it also work fot the 8ight 2.0t
http://www.horizonhobby.com/Products...odID=LOSA99061
thanks in advance
http://www.horizonhobby.com/Products...odID=LOSA99061
thanks in advance
08-04-2009 | 06:46 AM
#3997
Hole B on the Older rear's is now hole C on the 2.0 rear's....that's how i meant to say it...but didn't want to go look at the manuals to figure out which A,B,C,or D
Hole B on the 2.0's is 2nd In from the inside....same with the 1.0's....#/letter starts from the inside.
08-04-2009 | 08:30 AM
#4000
Definately need two sets of 2.0 rears-pm me your paypal and I'll make payment asap. Thanks and hope all is well.
Thanks
Jason
Thanks
Jason
just wanted to let you all know that i am not gonna be offering modded hubs and spindles anymore i have 1 set of 1.0 rears and 8 sets of 2.0 rears and 3 sets of 2.0 fronts if interested hit me up and i will get them out asap they will be ready to ship tues thanks again j-dub.
they will be $31.50 shipped thanks again
they will be $31.50 shipped thanks again
08-04-2009 | 01:33 PM
#4003
08-04-2009 | 01:53 PM
#4004
Ive had a couple caps round out on me.....i just make sure the plastic insert that goes on the stand off first is in good condition and not worn down to allow the cap to round out easier.....please describe exactly what is happening to your caps ?