what bar are you using that is lighter than the stock 2.3mm?

how much softer are you going in the springs? white or black? and when you go to the softer string do you still run the same shock oil?

by a shorter rear camber link do you mean mounting it at 1/A

tix i have just gone to white springs on the back 25 wt oil works pretty good mate

i got your parts matt

I ran black front and rear the other week and the car ran very well. our track way abit rough and the black soaked up the bumps much better than the stock setup.
i left the origional oils in the shock (32.5)

i look forward to doing more testing the weather was terrable this week the sun starts to shine and fly out to work again oh well next time
tix i give you call later today mate

Black Springs, 56 pistons 32.5 shock oil, and you have to cut about 1/8" on each side of the rear camber link and add 2 ounces of weight right in front of the rear pivot on the chassis. Shocks all the way out. 2.0mm swaybar Per Casey

Thanks Vareck

or no weight and 30 give it a try guys see what you think

Tix yes down on the tower and inside on the hub

what are the track conditions like with this set up ?

where do you get a 2mm swaybar from.
the smallest that comes with the car is a 2.3mm

Can someone list the shock springs from hardest to softest.

http://www.amainhobbies.com/product_...way-Bar-Set-20

comes in the bag of spings and sway bars you get 2

Yep thats the one

So far I have liked it on all types of track conditions that I have run it on.

Its not that many changes you can do it between runs to see how it feels. (except for the camber link I would cut it first and then try it back to back)

can you get that setup sheet posted up on the losi page please casey so that we can see the intire setup.

i didnt get a 2mm sway bar with any of my 2.0 buggys or truggies.
All i got were 2.3 / 2.5 / 2.7

Few questions...

When you say "move the shocks outside" are you referring to going to the #3 hole on the shocktower AND the outside hole on the arm?

Are you changing the front end of the truck at all, or are you still using the stock set-up for the front?

Where are you using (if at all) the SmartDiffs?

Thanks.

CJ Weaver

My latest body. What do you think?

i think its kool man...let us know how its wears