Hi guys, I have a couple of question about charging these batteries
http://b-p-p.com/product.php?product...&cat=61&page=1
I already have a 2 chargers but they both have align connectors, and I really didnt want to spend an arm and a leg on a new charger, I was looking at this
http://b-p-p.com/product.php?product...&cat=24&page=1 but didnt know if I needed anything else to make it work or does it work with my venom charger or should I just go with this http://b-p-p.com/product.php?product...&cat=24&page=1

I am open to suggestions even if you guys think I should try another battery combo let me know (3 cell lipo) and as always thanks in advance

links dont work...

try it now

LBA10 is good, but if u r using this with your venom charger, u cannot read individual cell V. the 403 is good, but only charge up to 3AMP, and it's the lipo only charger, get the 606i DC version, its the best value charger.

would the Hyperion EOS0403i. be a good choice if I already have two lipo chargers?

Doesn't the Venom charger have a built-in balancer? In which case, you should just have to get a balance plug adapter.

yes but I cant find an adapter...thats what I was looking for

Does the Hyperion chargers use a different style balance plug (the plug that goes into the charger itself) than the Venom charger? If not, then there's a whole bunch of balance battery plug adapters at the bottom of this page:

http://www.b-p-p.com/home.php?cat=27

yeah I was looking at this page but cant tell which one to use and I cant call them because they dont have a number listed

Venom uses JST-XH and the Hyperion lipo uses PolyQuest/Hyperion type balance connector. I had a similar prob with my Accucel-6 - it has the plug in balance connection built-in to the side of the charger like Venom does. This solved my prob - you may be able to find it somewhere over here that sells iMAX chargers and accessories -

http://www.hobbycity.com/hobbycity/s...idProduct=7350


The wire harness will plug into the side of the charger and let you connect the adapter board which will accept the PQ/HP type balance connection. The label on mine says "HP/PQ Adapter p/n SK-HQA0P100".

No need to get another charger, unless you just want another of course - I only have 5, lol.