to go big block is it worth it
#16
yeah don't really see the 18tm around anymore
so looks like the 21tm for you
you could also consider rb
they have a drop in for the revo also
tm523 comes with pipe header and engine for like 300
have heard people say its a screamer also
could always use the search tool and see what people say about it
could also consider the pico .26
would have to pick up their engine mount
could get that whole getup for like 200 bucks
i've ran it before and it was ok
front engine bearing leaked after a while for me
have heard a few other people say the same thing
seen others have slight tuning problems with it
it ran fine for me
kinda has mixed reviews really
i know some people who just love it
and some people who would never buy it again
just thought i'd give you a bit more options
hope this helps you a bit more
so looks like the 21tm for you
you could also consider rb
they have a drop in for the revo also
tm523 comes with pipe header and engine for like 300
have heard people say its a screamer also
could always use the search tool and see what people say about it
could also consider the pico .26
would have to pick up their engine mount
could get that whole getup for like 200 bucks
i've ran it before and it was ok
front engine bearing leaked after a while for me
have heard a few other people say the same thing
seen others have slight tuning problems with it
it ran fine for me
kinda has mixed reviews really
i know some people who just love it
and some people who would never buy it again
just thought i'd give you a bit more options
hope this helps you a bit more
#17
yeah don't really see the 18tm around anymore
so looks like the 21tm for you
you could also consider rb
they have a drop in for the revo also
tm523 comes with pipe header and engine for like 300
have heard people say its a screamer also
could always use the search tool and see what people say about it
could also consider the pico .26
would have to pick up their engine mount
could get that whole getup for like 200 bucks
i've ran it before and it was ok
front engine bearing leaked after a while for me
have heard a few other people say the same thing
seen others have slight tuning problems with it
it ran fine for me
kinda has mixed reviews really
i know some people who just love it
and some people who would never buy it again
just thought i'd give you a bit more options
hope this helps you a bit more
so looks like the 21tm for you
you could also consider rb
they have a drop in for the revo also
tm523 comes with pipe header and engine for like 300
have heard people say its a screamer also
could always use the search tool and see what people say about it
could also consider the pico .26
would have to pick up their engine mount
could get that whole getup for like 200 bucks
i've ran it before and it was ok
front engine bearing leaked after a while for me
have heard a few other people say the same thing
seen others have slight tuning problems with it
it ran fine for me
kinda has mixed reviews really
i know some people who just love it
and some people who would never buy it again
just thought i'd give you a bit more options
hope this helps you a bit more
If i were you i would get the mach .26 and the new era big block kit.
#18
yeah i never used the ofna engine mount for my picco 26
i just used the traxxas big block mount
i guess i was lucky because the ofna mount was out of stock
this is great
even more options to help daniel15fl out
hey daniel15fl,
when you pick an engine let us know how it goes and what you went with
and how you like it
maybe there will be a bit more people putting in their 2cents to give you a bigger option
hmm the new era mount?
is that the one that you slide side to side to adjust the gear mesh
instead of like how the stock one pivots off the inner screw?
i just used the traxxas big block mount
i guess i was lucky because the ofna mount was out of stock
this is great
even more options to help daniel15fl out
hey daniel15fl,
when you pick an engine let us know how it goes and what you went with
and how you like it
maybe there will be a bit more people putting in their 2cents to give you a bigger option
hmm the new era mount?
is that the one that you slide side to side to adjust the gear mesh
instead of like how the stock one pivots off the inner screw?
#19
picco outlaws are baddass, i got one on my savy but i have a surefire .32 on my t-maxx. if you want a bigblock basher ill sell you mine if interested. if not u will need to do some upgrading, i got rr steel spur and forward only and primary, with mip shafts all th way around with a custom 3.3 shaft for center to rear diff because i have the extended chassis. if you want mine i got about 1500$ in it, ill sell for 500 with motor and 380 without. i know i probly wont get this but all that i hav in it i need to get something for it. plus i has the stoc chassis and enough parts to build 3 more maxxes. pm me
#21
I have the TRX 3.3,Picco Max .26,OS .21TM and RB TM523. I have four Revo's.All have plenty of power but I think the OS .21TM has the smoothest power band,great low to mid rpm and holds a tune The RB is almost to violent for the track.Its cool that it comes with a header,mount and pipe.The Picco lacked top end put the new JL Red Dot version may solve this.I also ran the Traxxas resonator pipe.The 3.3 has great mid to top end but a lower quality engine.Stock up on engine bearings or get thr TKO ceramics.The OS .21TM is over priced but a great engine for the Revo for racing.It provides smooth power,decent fuel economy,light weight,bolt in fit with no issues.
#22
big blocks are awesome.. i say its worth it. i dropped an lrp .28 into my savvy and my savvy is flying now. plenty of torque. i never seen an revo with a big block but i like to see 1. i did see 1 with a os 21 and it was flying.
#24
I run an 18TZ and a 21TM in mine. I like the TZ a little better.
You can make the TZ a drop in motor for less than a 21TM..
http://cgi.ebay.com/OS-18-TZ-P-T-ABC...lenotsupported
You'll need to get these to make it a drop in motor.. Or you can do a little trimming on the crank, and use a OFNA Clutch nut and it will work.
http://cgi.ebay.com/O-S-21912000-OS-...lenotsupported
http://cgi.ebay.com/O-S-21911800-OS-...lenotsupported
http://cgi.ebay.com/O-S-21922000-OS-...lenotsupported
http://cgi.ebay.com/Ths-Racing-Revo-...lenotsupported
You can make the TZ a drop in motor for less than a 21TM..
http://cgi.ebay.com/OS-18-TZ-P-T-ABC...lenotsupported
You'll need to get these to make it a drop in motor.. Or you can do a little trimming on the crank, and use a OFNA Clutch nut and it will work.
http://cgi.ebay.com/O-S-21912000-OS-...lenotsupported
http://cgi.ebay.com/O-S-21911800-OS-...lenotsupported
http://cgi.ebay.com/O-S-21922000-OS-...lenotsupported
http://cgi.ebay.com/Ths-Racing-Revo-...lenotsupported
#25
this one's pretty cool
http://www.youtube.com/watch?v=r3fBT10C3pc



