Don't forget to set the ride hight!! Some people forget that on a Losi ride hight is very important.

Yep, now that I set the droop as per spec, I will need to re-check the camber and ride height settings. I am getting some ali blocks made to 39mm and 42mm as per spec.

ride height is 1 of the MOST important setting's to always be on top of.....ive found the 8ight's are Uber sensitive and will handle like poo if they are off by more then a couple mm...get yourself a decent ride height gauge and get measuring.

Losi makes one of the cheapest ones and it's great!

http://www.carolinasrc.com/Webstore/...dproduct=12244

Team AE's is about twice as much but really nice as well...

http://www.carolinasrc.com/Webstore/...idproduct=3600

Here's the body back and now mounted. Looks perfect and matches my remote pretty good color wise . Can't beat that at $25

Awesome paint! Let us know who paints like that for $25?

hey is the 2.0 way beeter than the 1.0 and is it good idea to convert 1.0 to 2.0

This guy paints like that for $25 http://www.rctech.net/forum/r-c-item...y-painted.html on and before anyone says anything here i sent the painter a pic of one of PIMP_9000 Darrens bodies and he copied it for me. Some complaining is being done like the painter stole Darrens paint scheme when I sent him the picture. Who doesnt copy pictures and paint schemes these days. I could afford $25 but not $70 to $109 which is what Darrens body like this sold for one ebay! But it has more graphics to it then mine.

Someone plz enlighten me how to use it, maybe it's just one of my slow days, but I can't figure it out. When removing the engine, do i remove it with the motor mounts or just the engine???!!!!

Remove the engine and blocks as one, leaving the motor mount secured to the chassis.

Ok guys....toasted a outer real wheel bearing. Where can I get the replacement or upgrade?? Heard this is a possible weak link.

Replace bearings or MSG Jdub on here he willl hook you up with carriers that hold a larger bearing.

I thought I read on a post that someone made an aftermarket bearing that goes in the stock location. Possibly boca or acer or advid??

PM J-DUB (click the link) I purchased his rear hubs and havent had a bearing fail since.

Whoops yea J-DUB.