[QUOTE=Shawn Palmer;5678929]Hi Russ:
Start with 98/34 and the timing advance maxxed out.

If you didn't run the timing maxxed in your 1.1, then take away another tooth per advance setting you are going up.

Keep your eye on motor temps every minute or so for the first few runs. If you follow the above, you'll be within a few teeth either way. (too hot - lose another tooth or two, or not quite fast enough add a tooth or two

shawn, max the motors timing or the speedo's setttings on the timing

For any spec motors i like esc timing max and motor at 0 to start.

Yes some of the champ edition don't have fans. I know the Reinhard one dosen't have a fan, and the Jillies one does. They go harder in every way without the fan but also have more wheelspin. I like a cut down fan best. The full fan is great for low grip as it tones down the spool up for better control.

I just ordered my 2.0 esc today, I am going to be running mod. What FDR should I be looking at for a 4.5 motor, it is an Orion vortex. Also what base setting should I start with. I am upgrading from a GTB. - Medium to large track

Thanks.

Cool I will try and get a Mark R one, if i can find one in stock

Thanks For your help

Antoni

ok i looked at a few places and only found rcmodel having the special edition motors. There all out of stock. Does anyone else know any other place that has the motors, or any other 4.0 motor without the fan?

Thanks

I want to know this too...I got mine any haven't run it yet...I be racing this weekend in mod class indoor carpet foam tyres..I bought it with 2 motors 3.5 and 4.5...What esc timing do you usually use for the motors I just mentioned? BTW I ve got the LCD Pro Card as well..

I ran mod sedan at the carpet nats, medium sized track, ended up with 21.5mm rollout, esc timing at 0 for a 4.5...should be a decent starter for you.

i saw this website...seem like evething r same with speedpassion except d casing...

www.hobbywing.com

how much straight line in feet or meter for medium size track?

n for

WOW that is low.

I run max timing even for mod but mayb I should try lower. I usually start at 22mm for a 4.5t motor.

It's reasonably common knowledge that Speed Passion speedo's are made by Hobbywing, the speedo you are referring to looks like a GT 1.1?

It's no big revelation that "some" of our products come from the Hobbywing factory, but what happens to our products as opposed to the stuff you see on that website is quite a bit different.

around 90 feet
I dont like high timing with the 2.0 while running mod, it is just tooo much.

Once Adam touches it it goes fast